To change the display information while tuning into an ensemble
Normally service name is shown on the display. If you want to change the display information, press DISP.
Each time you press the button, the following information appears on the display for a while.
Clock time
Service name
Ensemble name
Channel number
Frequency
Band/Preset number
To tune into a particular ensemble without searching:
1 Press and hold DAB (FM AM) to select DAB tuner as the source.
2 Press DAB (FM AM) repeatedly to select the DAB band (DAB1, DAB2 or DAB3).
3 Press and hold ¢ 
or 4 
for more than 1 second.
4 Press ¢ 
or 4 
repeatedly until the ensemble you want is reached.
•If you hold down the button, the frequency keeps changing until you release the button.
To restore the FM/AM tuner
Press and hold DAB (FM AM) again.
Storing DAB services in memory
You can preset up to 6 DAB services in each DAB band (DAB1, DAB2 and DAB3) manually.
1 Select the DAB tuner.
Each time you press and hold the button, the DAB tuner and the FM/AM tuner are alternately selected.
DAB 
FM/AM
2 Select the DAB band (DAB1, DAB2 or DAB3) you want.
Each time you press the
button, the DAB band
changes as follows:
DAB1 
DAB2 
DAB3
3 Tune into an ensemble you want.
4 Select a service of the ensemble you want.
MO
Press RND (5) to select the next service.
Press RPT (°) to select the previous service.
CONTINUED ON THE NEXT PAGE
ENGLISH
27
