ENGLISH
3 Tune into a station you want while “M” is flashing.
Press ¢
to tune into stations of higher frequencies.
Press 4 
to tune into stations of lower frequencies.
•If you release your finger from the button, the manual mode will automatically turn off after 5 seconds.
•If you hold down the button, the frequency keeps changing (in 50 kHz intervals for FM and 9 kHz intervals for AM – MW/LW) until you release the button.
Storing stations in memory
You can use one of the following two methods to store broadcasting stations in memory.
•Automatic preset of FM stations: SSM (Strong- station Sequential Memory)
•Manual preset of both FM and AM stations
FM station automatic preset: SSM
You can preset 6 local FM stations in each FM band (FM1, FM2 and FM3).
1 Select the FM band (FM1 – 3) you want to store FM stations into.
Each time you press the button, the FM band
changes as follows:
When an FM stereo broadcast is hard to |
|
| FM1 |
| FM2 |
| FM3 |
| AM |
|
|
|
|
|
|
|
|
| |||||
|
|
|
|
|
|
|
|
|
|
| |
receive: | 2 Press and hold both buttons for more | ||||||||||
Press MO RND (monaural/random) while | |||||||||||
listening to an FM stereo broadcast. | than 2 seconds. | |||
• Each time you press the button, the MO | ||||
| ||||
indicator lights up and goes off alternately. |
| |||
| Lights up when receiving |
| ||
| an FM broadcast in stereo. |
| ||
|
|
|
| |
|
|
|
| |
|
|
|
| |
|
|
|
| |
MO
“SSM” appears, then disappears when automatic preset is over.
When the MO indicator is lit on the display, the sound you hear becomes monaural but the reception will be improved (the ST indicator goes off).
Local FM stations with the strongest signals are searched and stored automatically in the band number you have selected (FM1, FM2 or FM3). These stations are preset in the number buttons — No.1 (lowest frequency) to No.6 (highest frequency). When automatic preset is over, the station stored in number button 1 will be automatically tuned into.
6
