JVC KT-SR3000 Alarm Clock, Program Alert, Set Alarm, Alarm Time default-12 00pm, Program Time/Day

Alarm Clock

You can set your JVC PnP to turn on at a specific time.

The last selected channel prior to shutdown will be played when the alarm turns on your JVC PnP.

Set Alarm:

Press CH 5 / ∞ (or CH + / –) to select either “Alarm On” or “Alarm Off (default)”, then press SEL (or SELECT).

Alarm Time (default—12:00pm):

Press CAT 3 / 2 (or CAT + / –) to set the hour, press CH 5 / ∞ (or CH + / –) to set the minute, then press SEL (or SELECT).

AM or PM will switch automatically as you advance the time.

Note: If your JVC PnP cannot receive the SIRIUS signals (satellite and terrestrial) correctly when the alarm time comes, you may hear a series of alarm tones.

Program Alert

You can program your JVC PnP to switch to a specified channel at a specified time.

•To use your programmed setting, make sure to set “Program Alert” to “Program Alert On”.

The following settings are possible on this sub-menu screen—

•Program Time/Day (default—12:00pm/Monday)

•Channel (default—Currently Playing Channel)

•Program Alert On/Off (default—Off)

Program Time/Day:

Press CH 5 / ∞ (or CH + / –) to select either “Time” or “Day”, then press SEL (or SELECT).

•Time: To set the time.

Press CAT 3 / 2 (or CAT + / –) to set the hour, then press CH 5 / ∞ (or CH + / –) to set the minute, then press SEL (or SELECT).

AM or PM will switch automatically as you advance the time.

•Day: To set the day.

Press CH 5 / ∞ (or CH + / –) to select the day— Monday, Tuesday, Wednesday, Thursday, Friday, Saturday or Sunday, then press SEL (or SELECT).

Make sure to set both “Time” and “Day” correctly.

33