JVC KT-SR3000 manual ~Factory Default, Sleep Mode, Auto Shutdown

Channel:

Press CH 5 / ∞ (or CH + / –) to select a channel on the channel list shown on the screen, then press SEL (or SELECT).

Program Alert On/Off:

Press CH 5 / ∞ (or CH + / –) to select either

“Program Alert On” or “Program Alert Off”, then press SEL (or SELECT).

Sleep Mode

You can specify the time until your JVC PnP shuts off—“Sleep Off”, “15 Minutes”, “30 Minutes”, “45

Minutes” and “60 Minutes”.

Press CH 5 / ∞ (or CH + / –) to select the time, then press SEL (or SELECT).

Your JVC PnP will now turn off after the selected time has passed.

• If “Sleep Off” is selected, Sleep Mode is canceled.

Auto Shutdown

You can make your JVC PnP shut off automatically if no operation is done for about one hour.

A beep sounds just one minute before your JVC PnP shuts off, and the “Cancel Auto Shutdown” screen will be shown (see note below).

To activate (or deactivate) Auto Shutdown

Press CH 5 / ∞ (or CH + / –) to select “Enabled” (or “Disabled”), then press SEL (or SELECT).

Note: When the “Cancel Auto Shutdown” screen is shown on the display, pressing SEL (or SELECT) will temporarily cancel Auto Shutdown.

~Factory Default

You can reset the following items to the default settings.

Press CH 5 / ∞ (or CH + / –) to select “Yes” (to reset) or “No” (to cancel the reset), then press SEL (or SELECT).

34