Then the
•Press CH 5 / ∞ (or CH + /
Note: If no operation is done for about 10 seconds, your JVC PnP automatically exits from the
To delete or deactivate the PDT for S-Seek
1. Press and hold MEMO (memory) for about 3 seconds.
The most newly stored PDT appears on the display.
2. Press CH 5 / ∞ (or CH + /
Push select to delete
3. Press CH 5 / ∞ (or CH + /
•Delete: To delete an unnecessary PDT. After pressing SEL (or SELECT), the Delete Confirmation screen appears.
–Select “Yes” (to delete) or “No” (to cancel deletion) by using CH 5 / ∞ (or CH + /
•
After pressing SEL (or SELECT), the
–Select “Off” (to deactivate the PDT for
•To exit from this screen without changing settings, press MEMO (memory).
25