JVC KT-SR3000 manual 0Antenna Aiming, Memory Options

0Antenna Aiming

When you use your JVC PnP at home, you have to adjust the aiming of the SIRIUS antenna to ensure optimum reception.

Upon entering this mode, two horizontal bar graphs are displayed.

The current satellite signal strength level is displayed on the SAT graph, while the current terrestrial signal strength level is displayed on the TER graph.

Adjust the aiming of the antenna so that the level indication on the bar graph moves as close to the right end as possible.

To exit from this option, press MENU or SEL (or SELECT).

Note: Terrestrial repeaters are typically used in large urban areas where satellite signal reception is not stable.

•Terrestrial signals (TER) may not be available in your residential area.

-Memory Options

You can activate or deactivate the S-Seek function. In addition, you can delete all stored PDTs (see page 23) at a time.

The following adjustments are possible on this sub- menu screen—“Auto Memory Search” and “Clear All Memory”.

Auto Memory Search: Press CH 5 / ∞ (or CH + / –) to select either “On” or “Off”, then press SEL (or SELECT).

•On: To activate the S-Seek function.

•Off: To deactivate the S-Seek function.

Clear All Memory: Press CH 5 / ∞ (or CH + / –) to select either “Yes” or “No”, then press SEL (or SELECT).

•Yes: To erase all stored PDTs.

•No: To cancel the erasure.

31