ENGLISH

Disc operations

The disc type is automatically detected, and playback starts automatically (for some discs: automatic start depends on its internal program).

If a disc does not have any disc menu, all tracks in it will be played repeatedly until you change the source or eject the disc.

If “” appears on the monitor, the unit cannot accept the operation you have tried to do.

• In some cases, without showing “,” operations will not be accepted.

~ Open the monitor panel.

! Insert a disc.

 

Label side

<Open/Tilt> menu appears.

•Shaded icons cannot be used at that time.

•By pressing and holding the button, you can open the monitor panel and eject the disc.

ŸPress [OPEN].Caution on volume setting:

Discs produce very little noise compared with other sources. Lower the volume before playing a disc to avoid damaging the speakers by the sudden increase of the output level.

Monitor panel closes automatically.

If not, press [CLOSE].

Caution:

Do not place your finger behind the monitor panel.

•[OPEN]: Open the monitor panel.•[EJECT]: Eject the disc.•[CLOSE]: Close the monitor panel.•[TILT +/–]: Tilt the monitor panel.•[Exit]: Erase this screen.

16