Enjoying surround sounds

You can enjoy multi-channel surround playback through the front, center, surround speakers.

•After connecting the center speaker, make sure to activate the center speaker; otherwise, no sound comes out of the center speaker (☞ page 64).

•Surround mode can also be used for “USB” and “SD.”

MULTI: For multi-channel encoded sources such as Dolby Digital*1, DTS*2, and DVD Audio. (When activated, “MULTI” is shown on the source information screen.)

Dolby Pro Logic II(Movie/Music): For 2 channel sources except for DivX/MPEG1/MPEG2 discs.

To turn on the surround...

1

2

3

•Off: Deactivates surround.

•On: Activates surround =go to the following steps.

4

ENGLISH

•Auto: When multi-channel digital signals come in, “MULTI” surround is activated.

When 2-channel or 2.1-channel signals come in, “4CH STEREO” is activated.

•Through: All incoming channel signals are sent to the corresponding speakers.

•Dolby PL IIMovie: Activates Dolby Pro Logic II Movie.

•Dolby PL IIMusic: Activates Dolby Pro Logic

IIMusic. You can adjust <Panorama> and <Center Width> setting (☞below).

Only when selecting <Dolby PL IIMusic>

After step 4 above...

1Activate <Panorama>.

•Panorama: Select <On> to add wraparound sound effect.

Continued on the next page

27OPERATIONS