USB operations

You can connect a USB mass storage class device such as a USB memory, Digital Audio Player *1, portable HDD, etc. to the unit.

~

USB cable from the rear of the unit

 

 

• You cannot connect a computer to the USB (

) terminal of the unit.

ŸPress [SOURCE], then press [USB]. (☞page 9)

• You can also use SOURCE on the monitor panel. Press it repeatedly.

ENGLISH

This unit can play the DivX/JPEG/MPEG1/MPEG2*2/ MP3/WMA/WAV/AAC*3 files stored in USB mass storage class device.

•You can operate the USB device in the same way you operate the files on discs (except OSD operation and those on the external monitor). (☞page 18 to 28)

•All tracks in the USB device will be played repeatedly until you change the source.

•You cannot select “USB” when Dual Zone is in use.

•Make sure all important data has been backed up.

*1 Except for JVC D. Player XA-HD500.

*2 Except for MPEG2 files recorded by JVC Everio camcorder (extension code <.mod>).

*3 This unit can play back AAC files encoded using iTunes. This unit cannot play back AAC files purchased from the iTunes Store.

Caution:

•Avoid using the USB device if it might hinder your safety driving.

•Do not pull out and attach the USB device repeatedly while “Now Reading...” is flashing on the monitor screen.

•Do not start the car engine if a USB device is connected.

•Stop playback before disconnecting a USB device.

•Do not leave a USB device in the car, expose to direct sunlight, or high temperature to avoid deformation or cause damages to the device.

35OPERATIONS