JVC KV-AVX900 –12, +12, Off, High, Sound, Off, On, Equalizer, Crossover, Menu items, Fader/Balance, Volume Adjust, Amplifier Gain, Subwoofer Phase, High Pass Filter

Equalizer

Flat/Hard Rock/R&B/Pop/Jazz/Dance/Country/Reggae/Classic/User1/User2/User3, ☞ [58]

Sound

Menu items	Selectable settings, [reference page]
Fader/Balance	Adjust fader—speaker output balance between the front and rear speakers.
	•	Upmost—front only (F6)
	•	Downmost—rear only (R6)
	When using a two-speaker system, set the fader to the center (0).
	Adjust balance—speaker output balance between the left and right speakers.
	•	Leftmost—left only (L6)
	•	Rightmost—right only (R6)
Volume Adjust	Adjust and store auto-adjustment volume level for each source, comparing to
	the FM volume level. The volume level will automatically increase or decrease
	when you change the source.
	–12to +12; Initial 00

•For Disc/SD/USB: An auto-adjustment level is commonly used when playing DivX/MPEG1/MPEG2/MP3/WMA/WAV/AAC files

Subwoofer Phase	Select either <Normal> or <Reverse>, which reproduces a better sound.
Subwoofer Level*18	Adjust the subwoofer output level. Level: –06to +08; Initial 00
High Pass Filter	Through: Select when the subwoofer is not connected.
	On: Select when the subwoofer is connected.
Crossover	Adjust the crossover frequency between the front/rear speakers and the
	subwoofer.
	80Hz, 120Hz, 150Hz
Amplifier Gain	You can change the maximum volume level of this unit.
	Off: Deactivates the built-in amplifier.
	Low: VOL 00 to 30 (Select this if the maximum power of the speakers is less
	than 50 W)
	High: VOL 00 to 50
Rear Speaker *19	You can activate/deactivate the rear speakers.
	Off, On

*18 This subwoofer level setting takes effect only when surround is deactivated. (☞ also page 27) *19 This setting takes effect only when Dual Zone is activated. (☞ also page 30)

Continued on the next page

ENGLISH

67SETTINGS