JVC KWV20BT instruction manual Audio setting screen, Crossover, Volume Adjust, Speaker Select

0 <Audio> setting screen

<Fader/Balance> 0 Displaying the <Settings> menu screen

<Loudness>
You can activate/deactivate loudness.
•	On (Initial): Boost low and high frequencies to
	produce a well-balanced sound at a low volume
	level.
•	Off: Cancels.
<Crossover>
Adjust the crossover frequency. (Page 39)		,,« "'"'"'""'''-"
		0

•

When changing settings for <AV Input>, and <Input> in <Navigation Input>, turn off the AV source while [AV) is selected for <Display> on the <HOME> screen. Other settings can be changed when the AV source is turned on.

- For KW-V40BT/KW-V20BT/KW-V200BT/KW-Vl 0 Region1/KW-V100: Make sure that "AV Off" is selected as the rear source. (Page 29)

Fader: Adjust the front and rear speaker output balance. • F6 to R6 (Initial: 0)

- When using a two-speaker system, set the fader to the center (0).

Balance: Adjust the left and right speaker output balance. • L6 to R6 (Initial: 0)

Press [.A.]/[T]/[<IIIII]/[...] or drag lffil to adjust. - To clear the adjustment, press [Center).

<Equalizer> Change the sound mode or adjust and store the equalization for each source. (Page 38) • Flat (lnitiai}/Naturai/DynamicNocal Boost/Bass BoostNibrant/User

<Volume Adjust>

Adjust and store the auto-adjustment volume level

for each source. (For discs, the adjustment is stored

for each of the following categories: DVD/DVD-VR/

VCD, CD, and DivX/MPEG 1/MPEG2/MP3/WMA/WAV.)

The volume level will automatically increase or

decrease when you change the source.

-15to +6 (Initial: 00)

---------------'"«<·X<~m.~··--

<Speaker Select>

Select the size of the connected speaker.

• Standard (lnitiai}/Narrow/Middle/Wide

44