JVC KWV20BT Installation procedure, When installing the unit using, Configure Initial Settings

'iQf:I!J,. HJgLQJWJ~il!lbUIDQili-	~O~In~~al~li:n:g~he:':tr:imst t ~p:la:t:e:(on:l:y~fo:flr~:K;;w:-•
------------------

0	Installation procedure
1	To prevent a short circuit, remove the key
	from the ignition and disconnect the 8
2	battery.
	Make the proper input and output wire
	connections for each unit.
3	Connect the speaker wires of the wiring
	harness.
4	Connect the wiring harness wires in the
	following order: ground, battery, ignition.
5	Connect the wiring harness connector to
	the unit.
6	Install the unit in your car.

Installing the unit

o Installing the unit (only for KW-V40BT

Region 4/KW-V20BT Region 4/KW-V1 0 Region 4)

1

v	4	oBT Region 4/KW-V20BT Region 4/
KW-V1 0 Region 4)
	Attach the trim plate		(@).

7	Reconnect the 8 battery.
8	Press the reset button.
9	Configure <Initial Settings>. (page 4)

•	Bend the tabs of the mounting sleeve with a
	screwdriver or similar utensil and attach it in place.
0 When installing the unit using the

mounting bracket removed from the car f~

•

Select the

appropriate

type

of

screw for the

mounting bracket: flat head (@).

(@)

or

round head

so