Initial settings
ENGLISH
When the TV is first turned on, it enters the initial setting mode, and the JVC logo is displayed. Follow the instructions on the
VCR/TV/DVD
Switch
Yellow button
Blue button
1Make sure to set the VCR/TV/DVD switch to the TV position.
•You cannot turn the TV on when the VCR/TV/DVD switch is set to the VCR or DVD position.
2Press the #button on the remote control
The receiver power lamp changes from red to green. After a short interval the TV power lamp lights green and the JVC logo is displayed.
•Check that the AC plugs on the power cords from the TV and receiver are connected to AC outlets.
TV (front)
Remote control |
sensor |
Power lamp |
•If the power lamp stays red and does not change to green:
Your TV is in the standby mode. Press the # (Standby) button again to turn your TV on.
•The JVC logo does not appear when your TV has been turned on once. In this case, use the “LANGUAGE” and “AUTO PROGRAM” functions to make the initial settings. For details, see “INSTALL” on page 29.
3Press the abutton
The LANGUAGE menu appears.
LANGUAGE
BACK
TV OK
4Press the 5 and 6 buttons to choose ENGLISH. Then press the abutton
English is set for the
TELETEXT LANGUAGE
BACK
TV OK
5Press the 6 buttons to choose the teletext language group that corresponds to language of teletext programme that you want to watch
Group | Languages |
|
|
| Turkish, Hungarian, English, German, |
| French, Italian, Spanish, Portuguese, |
| Greek, Swedish, Finnish |
|
|
| Polish, Serbian, Croatian, Slovenian, |
| Czech, Slovak, Rumanian, Hungarian, |
| German, French, Italian, Swedish, |
| Finnish |
|
|
| Russian, Bulgarian, Lettish, Lithuanian, |
| Estonian, Ukrainian, Serbian, Croatian, |
| Slovenian, Czech, Slovak, English, |
| German |
|
|
| Arabic, Czech, Slovak. Hungarian, |
| English, German, French, Italian, |
| Spanish, Portuguese, Swedish, Finnish |
|
|
Receiver (front)
Abutton | Power lamp |
10
