Problem
| Poor sound |
Sound |
|
| “Voice Enhancer” does |
| not work |
| Wrong screen size |
| |
| No picture, no sound |
HDMI | No sound |
|
Green and distorted screen
| Some functions do not |
Functions | work |
Some inputs cannot | |
| be selected in the sub- |
| picture |
OUT |
|
terminal | No picture, no sound |
|
Actions
Adjust the “Bass” and “Treble.”
If receiving a poor signal in “Stereo / 
· 
”, switch to “Mono.” 
Adjust the channel reception using “Manual.”
“AI Volume” makes the effect of “Voice Enhancer” weak. Switch “AI Volume” to “Off.”
Switch “Size” in “HDMI Setting” to “1” or “2.”
Use the cable with HDMI logo.
Check if the device is compliant with HDMI.
Switch “Audio” in “HDMI Setting” to “Digital” or “Auto” for HDMI devices, or “Analogue” or “Auto” for DVI devices. (Not available for
Wait a little for the signal to stabilize when switching the signal format for an “HDMI” device.
It is not a malfunction. Some functions (dark background) in the menu do not work depending on the situation.
Some inputs are not output from the OUT terminal.
page
18
18
9
18
18
-
-
18
-
-
-
14
Problem
The LAMP indicator blinks rapidly
The power lamp and LAMP indicator blink alternately
Lamp
The power lamp and LAMP indicator blink rapidly simultaneously
Actions | page |
|
Keep the TV off for a while and then turn the power on |
|
|
|
| |
again. If the TV goes into warning mode, unplug the TV | - |
|
after the cooling has completed and consult your retailer. (It |
| |
may be a malfunction of the internal electrical circuits.) |
|
|
|
|
|
Keep the TV off for a while and then turn the power on |
| IMPORTANT! |
| ||
| ||
again. If the TV goes into warning mode, unplug the TV | - |
|
after the cooling has completed and consult your retailer. |
| |
(The internal temperature rises abnormally or the fan may |
|
|
be blocked.) |
|
|
|
|
|
all warnings. |
| PREPARE |
| ||
| ||
If this condition occurs soon after replacing the lamp, |
|
|
reinstall the new lamp unit. (The lamp unit may not be |
|
|
inserted into the lamp housing correctly.) | 6 |
|
Repeat the lamp installation steps, taking care to observe |
| |
- Make sure the lamp sits fl at inside the housing area. |
|
|
- Make sure the lamp cover is reinstalled. |
|
|
If this condition occurs except for replacing the lamp, keep |
|
|
|
| |
the TV off for a while and then turn the power on again. If |
|
|
the TV goes into warning mode, unplug the TV after the | - |
|
cooling has completed and consult your retailer. (It may be |
|
|
a lamp malfunction.) |
|
|
|
| USE |
|
| |
|
|
|
SETTINGS TROUBLE?
21
