JVC 0706TKH-MW-VPC manual Preparation, Prepare the Replacement Lamp Kit, Remove the lamp unit

Replacing the lamp Before replacing the lamp, read all the instructions.

The TV uses a lamp to project the picture onto the screen. When the lamp has blown or when the picture becomes dark, replace the lamp.

Before replacing the lamp, read all the instructions carefully.

If you feel unsure about replacing the lamp yourself Consult your retailer

1	Turn the TV off	Wait until the LAMP	Unplug the TV
		indicator stops blinking

LAMP indicator and Power lamp are refered as “LAMP LED” and “POWER LED” on the Instructions of

Preparation

Prepare the Replacement Lamp Kit

For purchasing the Replacement

Lamp Kit, consult your retailer.

!Replacement Lamp Kit!Use only the specified

This lamp is for use with JVC model televisions. Using the lamp with a different television or other product could cause a malfunction and/or damage to the television or lamp.

Replacement Lamp Kit:

TS-CL110C

• High-pressure mercury lamp

Replacement Lamp Kit TS-

CL110C.

2	Wait for at least 1 hour until the lamp has fully cooled
3	Remove the lamp unit
	!	Never replace the lamp before it has fully cooled!
		The lamp becomes extremely hot while in use, which may cause a burn. After turning off
		the TV, wait for at least 1 hour.
	!	Never attempt to replace the lamp with the TV plugged in!
		Attempting to replace the lamp with the TV plugged in could lead to a severe electrical

When the lamp is near to its end...

The following message appears on the screen.

Lamp needs to replaced.

Refer to instructions book for replacement

instructions.	To make the message disappear
After replacing the Lamp, please reset
timer in the TV menu.
Press OK, if you do not want to see this
message again.

After the usage time of the lamp has reached to 6500 hours, this message appears every time you turn on the TV.

Possible causes of shortened lamp life

Turning on/off the TV repeatedly in a short amount of time

Keeping the TV turned on for more than 24 hours consecutively

shock.
1 Remove the lamp cover
!	If you feel any warmth
	near the lamp, DO NOT
	TOUCH IT!

Philips head type screw driver (cross-head type)

2 LoosenRemove the lamp unit Remove

Do not drop the lamp!

HD-Z70RF7 is used for explanation on the illustrations on this Instructions.

4