23
Load a prerecorded tape
(When loading a cassette tape
without the erase prevention
tab, playback will start auto-
matically).
1
2Press .
Playback will start.
If the cassette has not loaded
yet, will blink for 4 seconds.
To start playback
Press 3.
To stop playback
To rewind the tape or forward it rapidly
Stop the playback or recording with 3.
To rewind the tape:
Press .
To forward the tape:
Press .
To stop the tape-winding, press 3. To switch to playback directly
(without 3), press .
Forward/Reverse picture search mode
When the tape is being winded, you can switch to picture search
mode (see next page). To do this, press or and hold it down.
The unit will resume the tape winding as soon as the button is
released.
•This VCR selects the playback tape
speed SP or LP automatically.
•The Cassette tape and DVD disc can
be played back simultaneously. If you
press VCR or DVD, the tape playback
and DVD playback alternate with each
other on the screen.
NOTES:
Turn ON the TV and set to the video input mode.
Make sure TV/VCR/DVD switch has been slided to VCR/DVD. Then
press VCR to select the VCR mode. (The VCR indicator will light)
Preparation:
•
•
NTSC video cassette playback
When using a pre-recorded NTSC video cassette tape, the
connected TV set must operate with a 60 Hz vertical frequency.
Otherwise the on-screen picture will be affected by vertical
rolling. Even if your VCR set is capable of processing NTSC video
signals, the picture may be shortened vertically (appearance of
black bars at the top and at the bottom of the TV screen). The
dubbing of a NTSC video cassette tape to a standard PAL VCR
is not possible.
Cassette tape playback
VCR
VCR
2A73501AE(22-27) 4/17/02, 8:26 PM23