26
Preparation:
•Turn ON the TV and set to the video input mode.
•Make sure TV/VCR/DVD switch has been slided to VCR/DVD. Then
press VCR to select the VCR mode. (The VCR indicator will light)
1Press OSD.
The counter display shows the
tape running time during
playback or recording.
The Recorder will indicate REC
during recording for itself.
2Press C.RESET at the desired
tape position.
The counter display will be reset
to the "00:00:00" position (e.g.
the beginning of recording).
3Press 3 when playback or recording is finished.
Press ZERO RETURN.
The tape will be rewinded or fast forwarded and automatically
stop at the ”00:00:00” position.
4Press OSD once again to make the all indicator disappear.
The DISPLAY-button
Press DISPLAY during the playback. The clock and tape counter
alternate with each other in the display.
VCR
VCR
Counter Display
ZERO RETURN function
This function makes tape-rewinding
stop at the counter 00:00:00 position
automatically.
Note:
•When you load a video cassette, the dis-
play indication changes to "00:00".
•The counter display does not function
on non-recorded (blank) sections of the
tape. When you rewind, fast forward or
play tapes through blank sections, the
counter display stops.
Note:
You can set the tape counter to 00:00:00 with C.RESET anytime.
Therefore, the counter display can also indicate 00:00:00, even when
the tape counter does not reach its beginning yet. Even if the tape
counter indicates 00:00:00, it can be rewinded moreover. If the tape
was rewinded over the point of 00:00:00, the minus mark (–) appears
in the counter display. Although the tape counter seems to forward
when you press , in fact the tape is being rewinded. When the
tape reaches the beginning, the tape-rewinding stops automatically.
CH 2
12:00 SUN
00:04:38 SP
ZDFSTEREO
CH 2
12:00 SUN
00:00:00 SP
ZDFSTEREO
VCR
2A73501AE(22-27) 4/17/02, 8:26 PM26