JVC 2A73501A, LPT0715-001A 5

39

Before starting the duplicating process, select the proper

tape speed using . For a pre-recorded tape the

correct tape speed will be set automatically during

playback.

Duplicating a Video Tape

When you try to connect with a cable, make sure the power of both units have been turned off.

Connect the recording unit with the TV. Therefore you can just watch what the recording unit is recording.

Load a blank cassette tape with the erase prevention tab

intact into the recording DVD/VCR. Load the previously

recorded cassette tape into the playback VCR or a video

camera.

Note:

Use AUX or PR of the recording DVD/VCR to select the

"A1", "A2" or "A3" instead of the preset channel.

A1 = TV-RGB/Composite Scart Socket

A2 = VCR/DECODER Scart Socket

A3 = Front AV jacks

While holding 2, press and then 4 of Recording unit.

Press PLAY-button and then PAUSE/STILL-button of

Playback unit. Now you can see the still picture of the

scene that you wish to duplicate.

5Press 4 of both units simultaneously to start the Duplicat-

ing.

Connection with second Video recorder or Video camera

1

2

3

4

CLOCK SET

SYSTEM SETUP

LANGUAGE/SPRACHE/LANGUE

AV2 [AV]

SELECT : /

ENTER

:OK

MENU

EXIT

:

•Select the “AV2” in menu

screen in the same way as the

step 1~2 on page 14.

Then press OK to select AV

mode.

TV-Scart socket

VCR/DECODER

SCART socket

(not supply)

Recording unit

TV

VCR

Press AUX on the

recording unit repeatedly

until A3 appears.

Playback unit

HR-XV1EU

OR

Playback on

camera

Playback unit

(not supply)

Recording unit (not

supply)

You can record disc material in DVD, Video CD, Audio CD, etc. onto a video tape with this DVD/VCR only.

If the DVD disc has a Copy-guard feature, the duplicating is not possible. A symbol mark “” will appear

on the screen for approx. 4 seconds. See page 42 for more information about the DVD playback.

Press DVD to select the DVD mode. (The DVD indi-

cator will light)

1

Press to start the disc playback.

2

During disc playback, while holding 2, press .

3

Duplicating a disc material onto a video tape

Load a cassette tape with the erase prevention tab

intact.

Select the tape speed in the VCR mode. (see P.28)

Load a disc you wish to duplicate.

Preparation:

•

•

•

You can set the duplicating time using the ITR-function.

At step 3 above press 2 repeatedly until the desired

duplicating time appears on the screen.(P.30)

Note:

(not supply)

2A73501AE(37-41) 4/17/02, 8:28 PM39

Contents

Main SAFETY FIRST Safety Precautions CAUTION CAUTION: IMPORTANT CLASS 1 LASER PRODUCT Page Features Contents Before using your unit Setting up the VCR section Tape playback operation Recording Advanced function of VCR section Parts and functions Front Rear Display Display window Remote control JVC TV Remote Control 12 3 How to install the batteries Battery precautions Change the custom code for remote control Connections and Installation Connect a TV with the Scart socket Playback connection Connection to a Satellite Receiver Connection to a Decoder (for Premiere Programs) Connect to a TV with S-Video Output Connect to an AV Amplifier with built-in digital surround Playback connection Connect to a Stereo Amplifier with Audio Output Connecting the optical digital cable Setting the TV to the AV-Channel 1,4 3 Setting the On-screen language 2 4 ATS Automatic Tuning System and Auto Time/Date Setting 1 ATS ACTIVE 2 3 2 3 4 ATS Skipping unwanted TV stations 1 2 3 4 5 1 2 3 4 1 2 3 4 6 2 3 4 Manual TV station presetting 5 6 7 8 To skip a channel position To cancel the channel skipping Loading and Unloading a Cassette Tape To prevent accidental erasure To record again Loading Unloading 2 To stop playback To rewind the tape or forward it rapidly Forward/Reverse picture search mode NTSC video cassette playback 1 Frame by Frame picture 5 Special playback/Playback sharpness/Skip Search Adjusting tracking condition 1 Scene repeat playback 4 5 Repeat Playback 1 2 3 4 The DISPLAY-button Video Index Search System Index Search 1 2 3 4 To Stop Recording Recording a TV Program Recording with a SCART Cable: Auto Rewind Feature To Display VCR operation Status **** 1 2 3 4 Instant Timer Recording (ITR) 1 2 3 4 SHOWVIEW-Recording 5 6 --:-------- -- - Timer-Recording 1 2 3 4 In case of Timer progarms-overlapping 1 2 3 4 Timer-Recording Detailed Description of the VPS/PDC Function NICAM/German A2 Stereo Recording and Playback NICAM programmes are divided into 4 types as shown below. NICAM stereo sound reception: NICAM/German A2 Stereo Recording and Playback German A2 stereo sound reception: Audio Mixing 4 Duplicating a Video Tape 5 Connection with second Video recorder or Video camera OR Duplicating a disc material onto a video tape Disc Title Chapter Track Removing Disc from Case 2 3 1 5 Playback procedure 1 2 5 Special playback Fast Forward Playback Locating a chapter or track Slow-motion Playback Review Playback 2 1 Zooming Repeat playback 2 1 2 A-B Repeat Playback 1 Memory playback/Random playback Memory playback 1 2 4 Random playback MP3 Playback 5 6 1 2 MP3 CD Information 1 2 In case of VIDEO CD playback Changing Subtitles language Changing angles / Title selection / DVD menu 1 2 Title Selection 1 2 DVD Menu 1 2 Changing Angles Parental control Parental control setting 5 Parental control 6 7 Setting menu language Setting audio soundtrack language Setting subtitle language Setting the aspect ratio of TV screen / Setting on Screen display Setting on Screen display Setting the aspect ratio of TV screen Setting Audio 1 2 3 1 2 Setting Operation 2 3 PBC 1 Selecting the sound enhancement (E.A.M.)/Setting Background/ Setting Screen Saver 1 Selecting the sound enhancement (E.A.M.*) 2 3 mode. Press or to select Initial Setup. 2 CDs to select On-Screen Language, TV Shape or Audio Out Select. Preparation: Setting initial setup Setting initial setup/output sound conversion table Status display of Disc T C Table of languages Problems and troubleshooting Problems and troubleshooting / Video head cleaning Video head cleaning Specifications