JVC LPT0923-001B manual Satellite Receiver Users

44 EN TIMER RECORDING

7 The SHOWVIEW number you entered and the matching timer-

SHOWVIEWTM Timer Programmingrecording information are displayed on the TV screen. Check the programme data.

You can programme this unit to timer-record as many as						● To cancel this setting, press RETURN.
32 programmes.
With the SHOWVIEW system, timer programming is greatly						IMPORTANT:
simplified because each TV programme has a corresponding code						Make sure the channel position number you wish to record is
number which your unit is able to recognize.						displayed; if not, see “ShowViewTM System Setup” ( pg. 70) and
You can use the remote control to enter the SHOWVIEW number.						set the Guide Program number correctly.
						8 Press rt to select the desired recording option as required.
● Make sure that the unit’s built-in clock is set properly.
● Turn on the unit.						Press rt to select the desired setting, then press ENTER.
● Turn on the TV and select the AV mode.						● “INPUT TITLE” ( pg. 50, “Modify Title Name”)
● Slide the TV/CABLE/SAT/DVD switch to DVD.						● “CATEGORY” ( pg. 51, “Modify Category”)
						● “VPS/PDC” ( pg. 45, “VPS/PDC Recording”)
		CABLE/SAT				● “WEEKLY/DAILY” ( pg. 45, “Weekly/Daily Recording”)
		TV			DVD	● “REC MODE” ( pg. 35, “Recording Mode”)
						9 Press rt to select “OK”, then press ENTER to access the
						Programme Confirmation screen.
0 – 9						10 Press w e to select “EXIT”, then press ENTER to complete
						timer programming.
						● To programme another timer, press w e to select “CONTINUE”, then
CANCEL						press ENTER.
	PROGRAMME					● If “PROGRAMME OVERLAPPED” appears on the TV screen, see
						page 47.
	ENTER					NOTES:
	RETURN					● There may be cases that SHOWVIEW Timer Programming function
						prolongs the stop time of the programming.
						● When two successive programmes are recorded on a DVD-RW disc
						with SHOWVIEW Timer Programming function, the beginning of the
CLEAR						second one may be left off the recording.
						● If the copy limited programme is received during timer-recording, the
						unit enters Record Pause mode. Recording starts again if it is
DISPLAY						switched to a recordable broadcast during the time you programmed.
VPS/PDC#
						IMPORTANT:
						If you have moved to a different area or if a broadcasting station’s
						channel number has been changed, the wrong channel number will
						be displayed on the SHOWVIEW programme screen in step 7. When
1 Load a recordable disc if recording to DVD.						this happens, set the correct Guide Program number for that station.
						( pg. 70, “ShowViewTM System Setup”)
2 Press PROGRAMME to access the programme top screen.
3 Press rtw e to select “SHOWVIEW”, then press ENTER.						Satellite Receiver Users
● When “PROGRAMME FULL DELETE UNWANTED TIMER						To timer-record a satellite broadcast using the SHOWVIEW
PROGRAMMES” appears on the TV screen, you need to cancel						system:
some of the reserved programmes. ( pg. 47)						A Perform “Satellite Receiver Control Setting” ( pg. 23).
4 Press the number keys to						B Perform “ShowViewTM Timer Programming” ( pg. 44).
		123	PROGRAMME > SHOWVIEW (1/2)			C Leave the satellite receiver’s power on.
enter the SHOWVIEW number of a
programme you wish to record.					SHOWVIEW NO.
				1 2 3 4

OR

Press rtw e to select the desired number key on the screen, then press ENTER. Repeat to enter all needed numbers.

SELECT WITH [ ] THEN PRESS [ENTER]

PRESS [PROGRAMME] TO EXIT

PROGRAMME ENTER

EXIT SELECT

1 2 3

		4	5		6
		7	8		9
	DELETE		0	DELETE ALL
RECORD TO						DVD
					CONFIRM

5Press rt to select “RECORD TO”, then press ENTER. Press rt to select the desired recording deck, then press ENTER.

6Press rtw e to select “CONFIRM”, then press ENTER.

●If the number you entered is invalid, “SHOWVIEW NO. ERROR CONFIRM SHOWVIEW NO. THEN RETRY” appears on the TV screen. Input a valid SHOWVIEW number.

●If “GUIDE PROGRAMME IS NOT SET SET GUIDE PROGRAM THEN RETRY” appears on the TV screen, set Guide Program Numbers manually. ( pg. 70)