JVC LPT0923-001B manual Simple Connections, Perfect Connections Recommended

SYSTEM CONNECTIONS EN 65

Connecting To A Satellite Receiver

Simple Connections

This is an example of a simple connection if your TV has one 21-pin AV input (SCART) connector.

Connect the satellite receiver to the L-2 IN/DECODER connector, then connect the L-1 IN/OUT connector to the TV’s connector.

NOTES:

●Set “L-2 SELECT” to “VIDEO” or “S-VIDEO”. ( pg. 61)

●You can use the Automatic Satellite Programme Recording function ( pg. 48) with this connection.

●To record a programme via the satellite receiver, select L-2 mode by pressing PR +/– so that “L-2” appears on the front display panel.

●For details, refer to the instruction manual of the satellite receiver.

Outdoor unit	Aerial
Satellite cable	TV aerial cable

Satellite receiver

ANTENNA IN

ANTENNA OUT

Perfect Connections (Recommended)

This is an example of recommended connections if your TV has two 21-pin AV input (SCART) connectors.

Connect the decoder to the satellite receiver’s connector if you have a decoder, L-1IN/OUT connector to TV’s connector, and L-2 IN/DECODER connector to the satellite receiver’s connector. Then connect the satellite receiver and TV.

NOTES:

●Set “L-2 SELECT” to “VIDEO” or “S-VIDEO”. ( pg. 61)

●You can use the Automatic Satellite Programme Recording function ( pg. 48) with this connection.

●To record a programme via the satellite receiver, select L-2 mode by pressing PR +/– so that “L-2” appears on the front display panel.

●To receive a scrambled broadcast, descramble the signal with the decoder connected to the satellite receiver.

●For details, refer to the instruction manual of the satellite receiver and decoder.

Outdoor unit	Aerial
Satellite cable	TV aerial cable
Satellite receiver
	ANTENNA IN
	ANTENNA OUT

TV

Decoder

TV

IMPORTANT

When you set “L-2 SELECT” to “SAT VIDEO” or “SAT S-VIDEO” ( pg. 61), it is possible to view a satellite broadcast with the TV set to its AV mode even if the unit is turned off. When the unit is in Stop mode or recording, press TV AV/VIDEO on the remote control to turn off the VIDEO lamp on the unit.

●If you turn on the unit when the satellite receiver’s power is off, nothing appears on the TV screen. In this case, turn on the satellite receiver, or set the TV to its TV mode, or press TV AV/VIDEO on the remote control to set the unit to the AV mode.