TIMER RECORDING EN 45

Weekly/Daily Recording

You can record programmes with one of the following weekly/daily timer settings.

For the HDD deck

When you select a mode other than ONCE, the space on the hard disk drive is saved for new recordings by overwriting previous recordings. To prevent loss of a needed recording, backup programmes you wish to save by dubbing them to DVD discs before overwriting previous recordings. Or save the title of weekly/ daily programmes to avoid overwriting of a previous week/day. ( pg. 47)

ONCE (One Time Recording)

In this mode a programme will not be automatically overwritten. WEEKLY (OVERWRITE) (Weekly Recording/Weekly Overwrite) When the set weekly programme is broadcast, the programme recorded last week is automatically deleted and overwritten by the new programme. Save the title of each programme you wish to save, then the recorded programme is saved and will not be overwritten by the new programme.

This week’s drama

Overwritten

Last week’s drama

MON–SUN (FOR A WEEK)/ MON–SAT (FOR A WEEK)/ MON–FRI (FOR A WEEK) (Daily Recording/Weekly Overwrite)

When the set weekly programme is broadcast, the programme recorded on the same day last week is automatically deleted and overwritten by the new programme. Save the title of each programme you wish to save, then the recorded programme is saved and will not be overwritten by the new programme.

VPS/PDC Recording

Now available from some TV stations, PDC (Programme Delivery Control) and VPS (Video Programme System) are services designed to assure safe, accurate timer recording. With this system, special code signals are transmitted together with the audio/video signals. These code signals control your video unit and have precedence over the advertised times you may have preset into the timer. This means that your unit will start and stop recording when the preset TV programmes actually start and end

even if the broadcast time of a preset TV programme is changed.

NOTES:

Make sure to press VPS/PDC# after completing timer programming procedure to activate the VPS/PDC recording function.

When you use Manual Timer Programming, set the start time (VPS or PDC time) exactly as advertised in the TV listing. A different time than advertised will result in no recording.

VPS/PDC recording is also possible when a satellite receiver or a cable system is connected to L-2 IN/DECODER connector on your unit.

VPS/PDC recording is also possible via the L-1 IN/OUT connector.

How to check if the station being received transmits a VPS/ PDC signal

AHold down DISPLAY for about 5 seconds. “VPS/PDC” appears blinking on the front display panel. If a VPS/PDC signal is detected from the station, “VPS/PDC” will stop blinking. If no VPS/PDC signal is detected from the station, “VPS/PDC” will blink at a slower rate.

B Press DISPLAY again to return to normal display.

This

week

Overwritten

Last week

MON TUE WED THU FRI

MON TUE WED THU FRI

MON–SUN (OVERWRITE)/ MON–SAT (OVERWRITE)/ MON–FRI

(OVERWRITE) (Daily Recording/Daily Overwrite)

When the set daily programme is broadcast, yesterday’s programme is automatically deleted and overwritten by the new programme. Save the title of each programme you wish to save, then the recorded programme is saved and will not be overwritten by the new programme.

Overwritten

Tuesday’s programme

Monday’s programme

For the DVD deck

ONCE (One Time Recording)

WEEKLY (Weekly Recording)

MON–SUN/MON–SAT/MON–FRI (Daily Recording)

Page 45
Image 45
JVC LPT0923-001B manual Weekly/Daily Recording, VPS/PDC Recording, For the HDD deck, For the DVD deck