BASIC OPERATIONS ON HDD DECK EN 41
Live Memory Playback
●Turn on the unit.
●Turn on the TV and select the AV mode.
●Slide the TV/CABLE/SAT/DVD switch to DVD.
●Press HDD so that the HDD lamp lights up on the unit.
This unit records pictures onto the hard disc, instead of video tapes, then plays back the pictures recorded on the disc. This makes it possible to achieve
| |
Recording | Playback |
Image figure of the hard disc
It is called “Live Memory Playback” to start playback of the programme being recorded, with a
Current playback point (Live Memory Playback)
|
|
| Current recording position | ||
Recording start point |
| (Recording point) | |||
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| Playback |
| Recording |
|
|
| continues |
| continues |
0 | 30 min. | 1 hour | |||
Currently elapsed recording time
Not only can this unit play back a programme previously recorded while recording or timer recording another programme, but the unit also allows you to play back from the beginning of a programme while continuing to record the same programme.
Temporary recording for Live Memory
This unit automatically records the channel being received, within the specified range of time, to the reserved space on the hard disc. The time range can be set for 30 minutes, 1 hour, and 3 hours.
( pg. 68)
NOTE:
Previous temporary recordings will be overwritten since the unit is always recording the channel being received. Thus, it is not possible to play back TV programmes recorded beyond the specified range of time since they are already overwritten. To avoid this in order to save titles, perform normal recording ( pg. 38), timer recording ( pg. 44, 46), or Live Memory Recording ( pg. 43).
About limitation on temporary recording
The temporary recording for Live Memory is cancelled in the following cases, and will start all over again when it is to resume.
●When the power is turned off
●When the system is powered again after a power failure was occurred
●When normal recording, timer recording, Live Memory Recording, or Automatic Satellite Programme Recording ( pg. 48) is performed
●When the “LIVE MEMORY” setting is changed ( pg. 68)
●When tuner channel setting is performed ( pg. 70)
●When dubbing is performed by pressing DUBBING ( pg. 56)
●When “DV” is selected by pressing PR +/– ( pg. 58)
Recording/playback Status Display
CABLE/SAT
TV
DVD
LIVE
NAVIGATION
Press NAVIGATION to display Library Database Navigation menu, then choose a programme to play back. ( pg. 49)
8
ON SCREEN
Live Memory Playback status can be checked by pressing ON SCREEN to display the bar meter on the superimpose display. The current status is superimposed on the TV screen. ( pg. 15, “When using Live Memory playback”)
NOTES:
●Live Memory Playback cannot be performed for approximately 30 seconds after recording has started.
●Although
●When using Live Memory Playback during timer recording, playback continues even after the end of the recording.
●When using Live Memory Playback during timer recording, playback is automatically stopped just before recording starts, and then recording starts when the time arrives for the next
●It is impossible to perform ITR even if you press 7 during Live Memory Playback. ( pg. 39)
Press 8 to display the programme being recorded, then perform ITR settings.
●Playback may be paused for a moment during Live Memory Playback, which does not interfere with recording.
●Live Memory Playback cannot be performed while recording the source from DV input. ( pg. 58, “DV Dubbing”)
●When LIVE CHECK is pressed to display the picture currently being recorded, the picture size may not be correct.
●Press 7 or LIVE to stop Live Memory Playback.
●Live Memory Playback cannot be performed, even if the “LIVE MEMORY” is set to other than OFF in “HDD SET UP”, because temporary recording on HDD stops during recording on DVD.
