66 EN

EDITING (VCR DECK)

Edit From A Camcorder

Recorder

You can use a camcorder as the source player and your unit as the recording deck.

Slide the TV/VCR/DVD switch to the right.

A Make connections.

Connect the camcorder’s AUDIO OUT and VIDEO OUT connectors to the unit’s front panel AUDIO and VIDEO input connectors.

●When using a monaural camcorder, connect its AUDIO OUT connector to the AUDIO L input connector on your unit.

●When a Master Edit Control - equipped JVC camcorder is used, the camcorder is capable of controlling the unit. Refer to the camcorder’s instruction manual for operating procedure.

B Select the VCR deck.

On the unit

Press VCR/DVD repeatedly so that the VCR indicator lights up.

On the Remote

Press VCR so that the VCR indicator lights up.

C Set the unit’s input mode.

Press AUX (number key “0”) and/or CH to select “F-1”.

D Set the edit mode.

See “PICTURE CONTROL” on page 73.

E Engage the Record Pause mode.

Use PLAY (4), REW (3), or FF (5) to locate the point where you start recording, then press and hold PAUSE (9) and press REC (7) to engage the Record Pause mode.

F Start the camcorder.

Engage the Play mode of the camcorder.

AUDIO input

To REMOTE

PAUSE

VIDEO

connector

input

 

Audio/video cable

 

(not supplied)

 

To Audio/VIDEO

Mini-plug cable

(not provided)

Output

(JVC camcorder

connectors

only)

Camcorder

To Edit

Player
G Start the unit.

Press PLAY (4) to engage the Record mode of the unit.

NOTES:

●All necessary cables can be obtained from your dealer.

●When you select “EDIT” to dub tapes in step D, be sure to select “NORM” after you finish dubbing the tapes.