76 EN

SUBSIDIARY SETTINGS (cont.)
Picture Settings

* The default setting is bold in the table below.

8 MONITOR TYPE

You can select the monitor type depending the TV used when you play back

16:9

DVD VIDEO discs recorded for wide-screen TVs. For more details, refer to

4:3 LB

“Monitor Set (DVD deck)” ( pg. 16).

4:3 PS

 

 

 

 

8 PICTURE SOURCE

You can obtain optimal picture quality by selecting whether the content on the

AUTO

disc is processed by field (video source) or by frame (film source).

FILM

Normally set to “AUTO”.

VIDEO

AUTO:

Used to play back a disc containing both video and film

 

 

source materials. This unit recognizes the picture type (film or

 

 

video source) of the current disc according to the disc

 

FILM:

information.

 

Suitable for playing back a film or progressive source disc.

 

VIDEO:

Suitable for playing back a video source disc with relatively a

 

 

few moments.

 

● If the playback picture is unclear or noisy, or the oblique lines of the picture

 

are rough, try to change to other modes.

 

 

8 SCREEN SAVER

The TV screen may be burned out if a static picture is displayed for a long time.

ON

When this function is set to “ON”, the unit automatically activates the screen

OFF

saver function if a static picture, such as an on-screen display or menu is

 

displayed for over 5 minutes.

 

 

8 FILE TYPE

You can select files to play back, when both MP3 files and JPEG files are

AUDIO

recorded on a disc.

STILL PICTURE

AUDIO:

Select this to play back MP3 files.

 

STILL PICTURE: Select this to play back JPEG files.

 

NOTE:

 

 

Be sure to open and close the disc tray after changing the setting. The unit reads the disc

 

again and the selected file type can be recognized.

 

 

 

Audio Settings

* The default setting is bold in the table below.

8 DIGITAL AUDIO OUTPUT

Set to the appropriate mode according to the type of the device connected to

PCM ONLY

DIGITAL AUDIO OUT connector on the rear of unit.

DOLBY DIGITAL/PCM

It is not necessary to set this mode when you connect no device to DIGITAL

STREAM/PCM

AUDIO OUT connector.

 

PCM ONLY:

 

Select this when you connect the unit’s DIGITAL AUDIO OUT

 

connector to the linear PCM digital input connector of other audio

 

device.

 

DOLBY DIGITAL/PCM:

 

Select this when you connect the unit’s DIGITAL AUDIO OUT

 

connector to the digital input connector of a Dolby Digital decoder

 

or an amplifier with a built-in Dolby Digital decoder.

 

STREAM/PCM:

 

Select this when you connect the unit’s DIGITAL AUDIO OUT

 

connector to the digital input connector of an amplifier with a built-

 

in DTS, Dolby Digital, or MPEG multichannel decoder.