JVC LT-26C31SUE, LT-26C31BUE, LT-26C31SJE Watch images from external equipment, „ Use the PR List

Remote control buttons and functions

„Use the PR LIST:

1Press the h(information) button to display the

PR LIST

Pressing the h(information) button changes the display as follows:

„ Use the PR LIST:
1	Press the h(information) button to display the
	PR LIST
2	Press the 5and 6buttons to choose an
	EXT terminal. Then press the abutton

PR LIST
PR	ID
AV
01	BBC1
02
03
04
05
06
07
08
09
TV	OK
-10	+10
D0011-EN

12 : 00

No display

• The EXT terminals are registered after the

programme number PR 99.

• You can choose a video input signal from the S-

VIDEO signal (Y/C signal) and regular video signal

(composite signal). For details, see “S-IN (S-VIDEO

input)” on page 23.

• If you do not have a clear picture or no colour

appears, change the colour system manually. See

“COLOUR SYSTEM” on page 20.

• This TV set has a function which can automatically

ENGLISH

2Press the 5and 6buttons to choose a programme number (PR). Then press the a button

•For programme numbers (PR) with the CHILD LOCK function set, the n(CHILD LOCK) mark appears next to the programme number (PR) in the

PR LIST.

•You cannot use the 6buttons to choose a programme number (PR) with the CHILD LOCK function set.

•Even if you try to choose a programme number (PR) with the CHILD LOCK function set, the n(CHILD LOCK) mark will appear, and you cannot watch the TV channel. To watch the TV channel, see “CHILD LOCK” on page 25.

Adjust the volume

Press the rqbuttons to adjust the volume. The volume indicator appears and the volume changes as you press the rqbuttons.

•The headphone volume is adjusted with the “HEADPHONE” menu (see page 22).

„Muting the sound

Press the l(muting) button to turn off the sound.

Pressing the l(muting) button again restores the previous volume level.

Watch images from external equipment

„Use the obutton:

Press the obutton to choose an EXT terminal.

TV mode EXT modes

Programme
numbers	EXT-1		EXT-2
PR 1 – PR 99	E1	E2	or	S2
	EXT-4		EXT-3
	E4	E3	or	S3

„Use the 6buttons:

Press the 6buttons to choose an EXT terminal.

change over the input according to a special signal

output from an external device. (The EXT-4 terminal

does not support this function.)

To return to a TV channel:

Press the bbutton, the p pbuttons or the number buttons.

To use the programme number PR 0 (AV): When the TV and VCR are connected only by the aerial cable, choosing the programme number PR 0 (AV) allows you to view images from the VCR. Set the VCR RF channel to the programme number PR 0 (AV) manually. For details, see “EDIT/MANUAL” on page 28.

Pressing the obutton changes the choice as follows:

TV mode EXT modes

Programme	PR 0	EXT-1		EXT-2
numbers				or
PR 1 – PR 99		E1	E2		S2
		EXT-4		EXT-3

E4 E3 or S3

•The VCR sends its playback image along the aerial cable as an RF (radio frequency) signal.

•Also see your VCR instruction manual.

11