JVC LT-26C31SUE, LT-26C31BUE, LT-26C31SJE, LT-26C31BJE manual Initial settings

Initial settings

When the TV is first turned on, it enters the initial setting mode, and the JVC logo is displayed. Follow the instructions on the on-screen display to make the initial settings.

VCR/TV/DVD

Switch

Yellow button

Blue button

1Make sure to set the VCR/TV/DVD switch to the TV position.

•You cannot turn the TV on when the VCR/TV/DVD switch is set to the VCR or DVD position.

2Press the #button on the remote control

After a short interval the TV power lamp lights and the JVC logo is displayed.

•Check that the AC plug on the power cord from the TV is connected to AC outlet.

Remote control sensor

Power lamp

3Press the abutton

The LANGUAGE menu appears.

LANGUAGE

BACK

TV OK

D0002(E)-EN

4Press the 5 and 6 buttons to choose ENGLISH. Then press the abutton

The on-screen display will then be in English.

The COUNTRY menu appears as a sub-menu of the AUTO PROGRAM function.

There are two COUNTRY menus. Pressing the yellow button changes the COUNTRY menu as follows:

	BACK	START		BACK	START
TV	OK	MORE	TV	OK	MORE

D0003-EN

5Press the 5 and 6 buttons to choose the country where you are

•For uses in the UK:

To receive SKY 1 you need a satellite tuner. You must have the satellite tuner set to SKY 1 before starting the AUTO PROGRAM function which follows.

6Press the blue button to start the AUTO PROGRAM function

The AUTO PROGRAM menu appears and received TV channels are automatically stored in the programme numbers (PR).

•To cancel the AUTO PROGRAM function: Press the bbutton.

AUTO PROGRAM		EDIT
	CH 10	PR	ID	CH / CC
		AV
		01	BBC1	CH	21
	20%	02		CH	22
		03		CH	23
		04		CH	24
	BACK	05		CH	25
		06		CH	26
TV	OK	07		CC	01
		08		CC	02
		09		CC	03

	BACK	ID
TV	OK	INSERT
	MOVE	DELETE

MANUAL

D0004-EN

After the TV channels have been registered in the programme numbers (PR), the EDIT menu appears

•If you want to, you can now edit the programme numbers (PR) using the EDIT/MANUAL function. For details, see “EDIT/MANUAL” on page 28.

ENGLISH

•If the JVC logo does not appear this is because your TV has already been turned on for the first time: use the “LANGUAGE” and “AUTO PROGRAM” functions to make the initial settings. For details, see “INSTALL” on page 27.

•If you do not want to edit programme numbers (PR), go to the next step.

If “ACI START/ACI SKIP” appears in the AUTO PROGRAM menu:

You can use the ACI (Automatic Channel Installation) function to decode the ACI data and complete the registration of all the TV channels quickly. For details of the ACI function and how to use it, see “Using the ACI function” on page 31.

If you don’t want to use the ACI function, press the 6 buttons to an choose ACI SKIP and then press a.

7