JVC LT-26C31SUE Additional menu operations, Using the ACI function Downloading data to a VCR

Additional menu operations

Using the ACI function Downloading data to a VCR

This TV has an ACI function which decodes the ACI (Automatic Channel Installation) data.

Using the ACI function allows all TV channels transmitted from the cable TV station to be properly registered quickly according to the data from the cable TV station.

Caution

•If your cable TV station broadcasts ACI data and if “ACI START/ACI SKIP” appears in the AUTO PROGRAM menu, the ACI function is enabled. In all other cases, it is disabled.

1Press the 6 buttons to choose ACI START. Then press the abutton to start the ACI function

When you don’t want to use the ACI function:

Press the 6 buttons to choose ACI SKIP and then press the abutton.

If the AUTO PROGRAM menu changes to another menu:

Depending on your cable TV station, there may be a broadcast selection menu set up by the cable TV station. Follow the menu and use the 5 and 6 buttons. After you have made the setting, press the abutton.

If “ACI ERROR” is displayed in the AUTO PROGRAM menu:

“ACI ERROR” means that the ACI function is not working properly. Press the abutton to start the ACI function again.

If “ACI ERROR” still appears even after you have tried to start the ACI function several times, press the 3 button to start the AUTO PROGRAM function. It does not cause any problem because all the TV channels are registered to the Programme numbers (PR) by the AUTO PROGRAM function.

2When the settings are completed, the EDIT menu is displayed. Return to the instructions that you were reading before, and continue the operation

When the “Initial settings” have been made:

Return to step 6 of “Initial settings” on page 8.

When the “AUTO PROGRAM” has finished:

Return to step 4 of “AUTO PROGRAM” on page 27.

•If you have any questions about the items in the Broadcast Selection menu or how to operate the menu, please contact your cable TV station.

•When the cable TV broadcast reception is poor, the ACI function will not work properly.

•If there is an error in the ACI data itself, the TV channel cannot be registered properly. If this happens, turn the ACI function off (ACI SKIP) and use the AUTO PROGRAM function. Or, use the EDIT/MANUAL function to correct the programme number (PR) setting.

You can send the latest programme numbers (PR) data to a VCR with the T-V LINK function.

•You can only do this when a T-V LINK compatible VCR is connected to the EXT-2 terminal.

•This only works when the T-V LINK menu is being displayed.

T-V LINK

DOWNLOAD TV VCR

BACK

TV OK

EXIT

D0005-EN

1 Turn on the VCR

2 PressDOWNLOADTVthe aVCRbutton TheD0037TRANSFER..-ENdata..transmission.begins.

The T-V LINK menu disappears once the data transmission ends.

When the T-V LINK menu changes over to another menu:

The TV has finished its menu. This new menu is operated from the VCR. See the VCR instruction manual for what to do next.

If “FEATURE NOT AVAILABLE” appears at the T-V LINK menu, check the following three items.

•Has a T-V LINK compatible VCR been connected to the EXT-2 terminal?

•Has the VCR power been turned on?

•Does the SCART cable that connects the EXT-2 terminal to the T-V LINK compatible VCR have all

its proper connections?

Then press the abutton to retry data transmission.

ENGLISH

31