JVC LT-26C31SJE, LT-26C31BUE manual Changing the Country setting, Using the Decoder EXT-2 function

Additional menu operations

Changing the COUNTRY setting

After the AUTO PROGRAM function is completed, you can change the country you have already set by using the AUTO PROGRAM function.

When registering the TV channels for French broadcast stations (SECAM-L system), perform this operation to change the country.

1Display the INSTALL menu

When the EDIT menu is currently being displayed:

Press the h(information) to return to the INSTALL menu.

2Press the 6 buttons to choose AUTO PROGRAM. Then press the abutton

A COUNTRY menu appears as a sub-menu of the AUTO PROGRAM function.

There are two COUNTRY menus. Pressing the yellow button changes the COUNTRY as follows:

	BACK	START		BACK	START
TV	OK	MORE	TV	OK	MORE

D0003-EN

3Press the 5 and the 6 buttons to choose a country

4Press the abutton to complete the setting

The menu disappears.

To return to the INSTALL menu from the COUNTRY menu:

Press the h(information) button instead of the abutton.

Using the DECODER (EXT-2) function

If you have a decoder connected to a T-V LINK compatible VCR, which in turn is connected to the EXT-2 terminal, use the DECODER (EXT-2) function to unscramble the scrambled TV channels.

1Turn on the decoder power

2Display the scrambled TV channel on the TV

Even if the decoder is working, a scrambled picture appears.

3Press the abutton to display the MENU

The MENU (main menu) appears.

4Press the 6 buttons to choose FEATURES.

Then press the abutton

The FEATURES menu appears.

FEATURES

SLEEP TIMER

BLUE BACK OFF ON

CHILD LOCK

DECODER(EXT-2) OFF ON

BACK

TV OK

D0023-EN

5Press the 6 buttons to choose DECODER (EXT-2). Then press the 5 buttons to choose

ON

An unscrambled picture appears.

To cancel the DECODER (EXT-2) function:

Press the 5 buttons to choose OFF.

6Press the abutton to complete the setting

The T-V LINK menu appears.

T-V LINK

DOWNLOAD TV VCR

BACK

TV OK

EXIT

D0005-EN

7Follow “Downloading data to a VCR” on page 31 to transmit the programme number (PR) data to the VCR

8If you have another TV channel you want to unscramble using a decoder, repeat steps 2 to 7

If the DECODER (EXT-2) function has been set to “ON” but the TV channel cannot be unscrambled, check the following:

•Has the decoder been connected to the VCR properly according to the VCR and decoder instruction manuals?

•Has the decoder power been turned on?

•Can the TV channel be unscrambled with a decoder?

•Do you need to change the VCR settings in order to connect the decoder? Confirm that the VCR is set properly by rechecking the VCR Instruction manual.

32