Introduction

21

(Continued)
Listening to Radio Broadcasts
You can store up to 30 FM radio stations and up to
15 AM radio stations.
■While the broadcast from the radio station
you want to preset is being received
1Set the remote control mode
selector to AUDIO.
2Press .
• The preset number flashes for approxi-
mately 5 seconds.
3While the preset number is flash-
ing, press the number buttons (
- or ) to select the preset
number you want to use.
• Refer to "Using the number buttons"
( page 17).
4While the selected number is
flashing, press .
• "STORED" appears and the selected radio
station is stored.
NOTE
• When you store a radio station to a preset number
to which another radio station has previously been
stored, the newly set radio station replaces the pre-
viously stored radio station.
■While an FM or AM broadcast is being
received
1Set the remote control mode
selector to AUDIO.
2Use the number buttons to select
the preset number of the radio sta-
tion to which you want to tune in.
• Refer to "Using the number buttons"
( page 17).
You can enter the name of a stored radio station
using up to 8 characters.
1Set the remote control mode
selector to AUDIO.
2Press .
3Entering a radio station name with
or the number buttons ( -
).
• To enter radio station names, refer to "Enter-
ing Titles" ( page 59).
4Press .
• "STORED" appears in the display window
and the entered radio station name is
registered.
NOTE
• When you store a radio station after you have
entered a radio station name, the entered radio
station name with the same preset number is
erased.
• You cannot enter radio station names after
selecting a radio broadcast with or .
• If you change the AM tuner spacing ( page 20),
radio station names remain unchanged.
Enter radio station names again, if necessary.
Press .
• Each time you press , the display tog-
gles as follows.
For the locations of remote control
buttons, refer to page 20.

Storing Radio Stations

(Preset)

Tuning In to a Preset Radio

Station

Changing the Display in the

Display Window

Entering radio station names

Display while a radio
broadcast is being
received ( page 20)
(Time display)
Clock display
(With an MD loaded)
Display of remaining
time for MD recording
UX-QD7[UB].book 21 ページ ２００４年９月３日　金曜日　午後２時４３分