Introduction

53

Recording Sound
(Continued)

Recording Sound to MDs

Press .
• Each time you press , the display tog-
gles as follows.
• It may be unlawful to record or playback
copyright material without the consent of the
copyright owner.
• You can record tracks having different MDLP
modes onto an MD.
• You cannot use the monaural extended record-
ing function with this product.
CAUTION
• Do not bump or sway the main unit during MD
recording. Be especially careful while "WRITING" is
displayed. Such movement may interfere with MD
playback.
• You cannot play back tracks recorded in LP2 or
LP4 with audio equipment that is not compatible
with MDLP. When you attempt playback, "LP: "
appears in front of the track title, and the main
unit does not produce any sound. When you play
back tracks recorded in LP2 or LP4 with audio
equipment that is compatible with MDLP, "LP: "
does not appear.
To activate or cancel the "LP: " indicator, press .
( on the right)
Press .
• Each time you press , the display toggles
as follows.
• You can record up to 254 tracks to an MD. If you
try to record 255 or more tracks, "DISC FULL"
appears.
• When you use a partially-recorded MD, this
product searches for the blank portion and
records the new tracks to that portion.
Unlike cassette tape recording, you cannot
record over old tracks on an MD.
• Changing in sound volume and quality on this
product during recording does not affect the
recorded sound.
• Sound from a CD is recorded as digital signals to
an MD. Sound from the radio or AUX is con-
verted from analog signals to digital signals dur-
ing recording.
• When you record a disc, track marks are auto-
matically inserted between tracks. However,
track marks may not be inserted when a DVD
VIDEO or DVD AUDIO is recorded.
NOTE
• The recorded sound level is automatically adjusted.
• Sound-synchronized recording is employed for
recording sound from other equipment (AUX).
With sound-synchronized recording, this product
automatically identifies sound signals from the
sound source and starts recording. When sound
from the sound source pauses for 30 or more
seconds, this product automatically quits record-
ing. The blank time between the last recorded
track and the next recorded track is approxi-
mately 2 seconds.

Things You Should Know

about MD Recording

Changing the display in the display

window during recording
Clock display
Elapsed playing time
of the chapter or
track being recorded
Remaining MD recording time
Recording disc track number
Recording MD track
number
Recording MD group
number
(When tracks have not
been recorded in a
group, "G - -" appears.
)

Recording Sound from Radio,

Cassette Tape or Other

Equipment

"LP: " indicator setting

: For deleting "LP: " from the track
title.
: For adding "LP: " to the track title.
CD-R/CD-RW/DVD AUDIO recording
• When you record sound from a CD-R, CD-RW
or DVD AUDIO onto an MD, pressing
may display "SCMS CANNOT COPY" in the
display window, and digital recording may not
be available.
In such a case, set the recording speed to nor-
mal, hold down for 4 or more seconds.
While ”ANALOG REC?” is displayed, press
once again to select analog recording.
UX-QD7[UB].book 53 ページ ２００４年９月３日　金曜日　午後２時４３分