JVC LVT1220-002A, UX-QD7W manual Recording Sound to MDs, Recording All Tracks from a Disc to an MD

Recording Sound to MDs

Main unit

Remote control

Recording All Tracks from a Disc to an MD

1 Press , and then press .

• The DVD is selected as the sound source and playback is stopped.

■When recording sound from DVD VIDEOs

• Play back a title or chapter, pause playback,

and then press to return to the begin-

ning of the first title/chapter.

• You may not be able to record a DVD VIDEO depending on the disc.

2 Insert an MD.

•Close the write protect knob on the MD

beforehand ( page 75).

3 Press to select the MDLP mode.

•Each time you press , the display tog- gles as follows.

:For standard stereo recording

(Maximum recording time is 80 minutes with an MD 80).

:For ×2 extended stereo recording (Maximum recording time is 160

minutes with an MD 80).

: For ×4 extended stereo recording (Maximum recording time is 320 minutes with an MD 80).

•As you change the MDLP mode

(SP→LP2→LP4), the sound quality also changes. When you want to record sound at the best possible quality, select the SP mode.

•When you use an MD car audio system, portable MD player or other MD player that is not compatible with the MDLP mode, select the SP mode.

4 Press to set group recording.

•Each time you press , the display toggles as follows.

:Activates group record- ing (initial setting).

: Cancels group recording.

• You can form or cancel a group after the

recording finishes. (		pages 63 and 66)
5 Press	to select the recording
speed.

•Each time you press , the display toggles as follows.

:×5 high speed recording (only for CDs)

: Normal speed recording

•Select "NORMAL REC" when you want to play back a disc other than a CD.

•Recorded sound quality is the same for both "HIGH SPEED" and "NORMAL REC".

•You cannot listen to the sound during ×5 high speed recording.

51