LG Electronics DV1000 Additional Operation DVD part, Last Condition Memory, Screen Saver

Additional Operation - DVD part

Last Condition Memory

DVD CD VCD1.1

This player memorizes the last condition for the last disc you have watched. Settings remain in memory

even if you remove the disc from the player or switch off the player. If you load a disc that has its settings memo- rized, the latest stop position is automatically recalled.

Notes

–Settings are stored in memory for use any time.

–This player does not memorize settings of a disc if you switch off the player before commencing to play it.

Screen Saver

The screen saver picture appears when you leave the

DVD Player in stop mode for about five minutes.

Video Mode Setting DVD VCD2.0 VCD1.1

With certain discs, the playback picture may be flick- ering or Dot Crawl is shown on straight lines. That means Vertical interpolation or De-interlace is not perfectly matched with the disc. In this case, the picture quality may be improved by changing the

video mode.

To change the video mode, press and hold DISPLAY about 3 seconds during disc playback. The new video mode number selected is displayed on the TV screen.

Check whether the video quality has improved. If not, repeat the above procedure until picture quality is improved.

Video mode change sequence:

MODE1	→	MODE2	→ MODE3	→ MODE4	→
MODE5	→	MODE1

If you turn off the the power, the video mode will be back to initial state (MODE1).

Notes on MP3 Discs

About MP3

An MP3 file is audio data compressed by using MPEG1, the audio layer-3 file-coding scheme. We call files that have the “.mp3” file extension “MP3 files”. The player can not read an MP3 file that has a file extension other than “.mp3”.

The player can not read a fake MP3 file that has a file extension “.mp3”.

MP3 Disc compatibility with this player is limited as follows:

1.Sampling Frequency / only at 44.1kHz

2.Bit rate/ within 32 - 320kbps

3.CD-R physical format should be “ISO 9660”

4.If you record MP3 files using the software which

cannot create a FILE SYSTEM, for example “Direct- CD” etc., it is impossible to playback MP3 files. We therefore recommend that you use “Easy-CD Creator”, which creates an ISO9660 file system.

5.A single session disc requires MP3 files in the first track. If there is no MP3 file in the 1st track, it can- not playback MP3 files. If you wish to playback MP3 files, format all the data in the disc or use a new

one.

6.We do not recommend using CD-RW discs. Please use finished CD-R discs only.

7.File names should be named using 8 letters or less and must incorporate the “.mp3” extension

e.g. “********.MP3”.

8.Do not use special characters such as

“_?!><+*}{`[@ ]:;\/.,” etc.

9.Total number of files on the disc should be less than 200.

10.Use 74 minute CD-R discs (650M), do not use 80 minute CD-R (700M) software.

This DVD player requires discs/recordings to meet certain technical standards in order to achieve optimal playback quality. Pre-recorded DVDs are automatically set to these standards. There are many different types of recordable disc formats (including CD-R containing MP3 files).

Customers should also note that permission is required in order to download MP3 files and music from the Internet. Our company has no right to grant such per- mission. Permission should always be sought from the copyright owner.

OPERATION

31