LG Electronics DV1000 owner manual Additional Operation VCR part Hi-Fi Stereo Sound System

Additional Operation - VCR part

Hi-Fi Stereo Sound System

Your VCR will record and playback Hi-Fi stereo sound. In addition it has a stereo NICAM digital stereo sound decoder. This allows you to record and playback the sound in several different ways. Video cassettes record- ed on your VCR will have a normal mono audio track

and two VHS Hi-Fi stereo audio tracks. These stereo tracks allow you to make audio recordings in Hi-Fi

stereo or	bilingual mode from a TV broadcast, stereo
audio system,	video disc or another Hi-Fi VCR.

2	Press D or E repeatedly to select:	AUTO, 4:3 or
	16:9.

AUTO:

Automatically plays back Wide-Screen programmes as Wide-Screen and Normal programmes as normal.

4:3

Only for playing back and recording Normal format recordings (4:3).

16:9:

Only for playing back and recording Wide-Screen format recordings (16:9).

1you to enjoy broadcasts with NICAM sound, as well

as standard stereo, bilingual and mono sound. The particular type of sound received or that recordedYour VCR’s NICAM digital sound decoder allows

				1	2	A B
will be briefly displayed on the TV screen for a						VCR
		REC	P	ACMS	AUTO	C	16:9
			R SET			OSDDr.
				Pr-12
couple of seconds:		f OSD	16:9		4:3		4:3
		ON		OPR	16:9		i
		OFF	4:3
STEREO NICAM
Sound is automatically recorded on the Hi-Fi stereo	Press	i to remove the menus.
and mono tracks of the video tape.	3 To enjoy Wide-Screen playback you must
BIL NICAM	connect your VCR to the TV using a SCART cable.
Both audio channels will be recorded on the Hi-Fi
stereo tracks. The primary language channel (left)
will be recorded on the mono track of the video
tape.
MONO
The sound is recorded on the Hi-Fi tracks and the
mono track of the video tape without any separation.

Press	AUDIO repeatedly until the desired audio
2 mode appears.
The choice is		STEREO,LEFT,RIGHT		and MONO.
3 In BIL NICAM playback the primary language is
output onthe left channel and the secondary chan-
nel is output simultaneously from the right channel
when audio output is set to			STEREO. The primary
language willbe output from both channels when the
audio setting is		MONO.
Please note that when adjusting the tracking control
Hi-Fi stereo sound may revert to			MONO.

Wide Screen Compatibility 16:9

Your VCR can record and play back wide screen aspect ratio programmes (16:9). To record a wide screen for- mat programme successfully the correct type of wide screen signal must be broadcast by the TV station.

1	Switch on	your VCR.
	Press	i.	16:9/4:3.
	Press	F or G to select
	Press	OK.

				1	2
REC	P	SET	Pr-12	TIME	SYS-
			ACMS
	R			DATE	TEM
f OSD	16:9			NIC
ON			OPR
OFF		4:3

VCR

Dr.

16:9

4:3

OK i

				1	2
REC	P	SET	Pr-12	TIME	SYS-
			ACMS
	R			DATE	AUTO TEM

fOSD NIC 4:3

ON	16:9	16:9
OFF	4:3 OPR

VCR

Dr.

16:9

4:3

i

30