29
Additional Operation - VCR partOn Screen Display
You may easily display the current time or tape counter,
amount of tape left, day, month, year, day of week,
programme channel, tape speed and operational mode
of your VCR will appear on the TV screen. If a recording
is taking place these On Screen Displays will not be
recorded onto the tape.
11
Press CLK/CNT to display.
Press CLK/CNT repeatedly to cycle through the
display options. The tape counter and amount of
tape left will appear if there is a tape loaded.
22
After 3 seconds the majority of the On Screen
Displays will clear leaving only the clock or tape
counter and the amount of tape left on the screen.
Press CLK/CNT again to remove all displays from
the TV screen.
Tape Counter Memory Stop
The Digital Tape Countercan be displayed on the display
window instead of the time by pressing CLK/CNT on
the remote control. The Digital Tape Counter indicates
the relative positions of recordings on the tape.
11
Press CLK/CNT.
Press CLEAR to set the counter to 0:00:00.
Press PLAYor start recording.
The tape counter will display the actual play time in
hours, minutes and seconds.
22
Press STOP when playback or recording is complete.
Press BACKWARD.
The tape will rewind and automatically stop when
the counter returns to 0:00:00.
Child Lock
The control buttons on the front of the VCR can be
switched off so that your VCR can only be operated
using the remote control.
11
Press C.LOCK.
will appear in the display window.
None of the buttons on the front of your VCR will
work (except STOP and EJECT).
If any buttons on the front of your unit are pressed
will flicker in the display window for a few
seconds.
22
Press C.LOCK again to switch off the child lock.
will disappear in the display window.
Video Doctor (Self-Diagnosis)
This feature informs you that there is a problem with
your VCR. These error messages will appear on the TV
screen.
11
Press i.
Press 11or 22to select Dr.
Press OK.
22
Press 33or 44to check a problem.
HEAD STATUS
OPLEASE CLEAN:
Clean your video heads.
TAPE STATUS
ONOT RECORDABLE:
Insert a tape with its protection tab in place
NO. OF TIMER PROGRAMME
O2
Shows the number of timer recording.
NEXT TIMER PROGRAMME
OBBC1 26 10:00~11:00 SP
Shows the current status of timer recording.
Press i.
ez (easy) repeat
By pressing & holding ez REPEAT during play back, the
holding section is replayed twice automatically.
11
During play back, press & hold ez REPEAT at the
point where repeat play is to be concluded.
Then, your VCR will go into reverse search.
22
Release ez REPEAT at the point where repeat play
is to start.
The holding section is replayed twice automatically.
Note
Pressing ez REPEAT again during repeat play, will
return to normal play.
REC
OK
i
SYS-
Pr-12
ACMS
12
TIME
DATE
Dr.
VCR
Dr.
VCR
TEM
PSET
R
OSD
ON
OFF
OSD
f
16:9
4:3
OPR
NIC
i
Dr.
VCR
VIDEO DOCTOR
OK
HEAD STATUS
TAPE STATUS
NO. OF TIMER PROGRAMME
NEXT TIMER PROGRAMME
OPERATION