Operation with DVD and Video CD
Playing a DVD and Video CD | General Features |
Playback Setup DVD VCD2.0 VCD1.1
Turn on the TV and select the video input source con- nected to the DVD player.
Audio system: Turn on the audio system
and select the input source connected to the DVD player.
1Press OPEN/CLOSE to open the disc tray.
2 Load your chosen disc in the tray, with the label facing up.
When a
3 Press OPEN/CLOSE to close the tray. READING appears on the TV screen, and playback
starts automatically. If playback does not start, press PLAY.
In some cases, the disc menu might appear instead.
If a menu screen is displayed
The menu screen may be displayed first after loading a
DVD or Video CD which contains a menu.
DVD
Use the 1 2 3 4 buttons to select the title/chapter you want to view, then press SELECT/ENTER to start playback.
Press TITLE or DISC MENU to return to the menu screen.
VCD2.0
Use the number buttons to select the track you want to view.
Press RETURN to return to the menu screen.
Menu setting and the exact operating procedures for using the menu may differ depending on the disc. Follow the instructions on the each menu screen. You also may set PBC to Off under setup. See page 19.
Notes
–If Parental Control is set and the disc is not within the Rating settings (not authorized), the
be entered and/or the disc must be authorized (see
“Parental Control | ”, on page 20). |
–DVDs may have a region code.
–Your player will not play discs that have a region code different from your player. The region code for this player is 2 (two).
–If you want to watch a DVD during timer recording, press TV/VCR on the remote control to select VCR mode.
Note
Unless stated otherwise, all operations described use the remote control. Some features may also be available on the Setup menu.
Moving to another TITLE DVD
1/3
When a disc has more than one title, you can move to another title as follows:
Press DISPLAY when playback is stopped, then press the appropriate numbered button
Moving to another CHAPTER/TRACK
DVD | VCD1.1 | 1/12 | 1/3 |
|
|
When a title on a disc has more than one chapter or a disc has more than one track, you can move to another chapter/track as follows:
Press | . or > briefly | during |
playback to select the next chapter/track or to return | ||
to the beginning of the current chapter/track. | ||
Press | . twice briefly to step back to the previous | |
chapter/track. |
| |
To go directly to any chapter during DVD playback, | ||
press DISPLAY. Then, press | 3/4 to select C | |
(chapter) (or for a Video CD, select T for track). Then, enter the chapter/track number using the numbered
buttons
Note
For
Slow Motion DVD VCD2.0 VCD1.1 |
| ||
1 | Press | . or > during pause. |
|
| The player will enter SLOW mode. |
| |
2 | Use the | . or > to select the required speed: | t |
| 1/16,t 1/8,t 1/4 ort 1/2 (backward), or | T 1/16, | |
T1/8,T 1/4 orT 1/2 (forward). 3 To exit slow motion mode, press PLAY.
Note
Slow motion playback in reverse is not applicable for
Video CD.
24
