Connections (Contd) / Important notes on controlling this unitConnecting to Optional Equipment

Connecting to an amplifier equipped with two

channel analog stereo or Dolby Surround

Connect the Left and Right AUDIO OUT jacks on this
unit to the audio left and right in jacks on your amplifier,
receiver or stereo system, using the audio cables.

Connecting to an amplifier equipped with two

channel digital stereo (PCM) or to an Audio/

Video receiver equipped with a multi-channel

decoder (Dolby Digital, MPEG 2 or DTS)

11
Connect this unit’s DIGITALAUDIO OUT jack
(COAXIAL) to the corresponding in jack on your
amplifier. Use an optional coaxial audio cable.
22
You will need to activate this unit’s digital output.
(See “Digital Audio Output” on page 19).

Digital Multi-channel sound

Adigital multi-channel connection provides the best
sound quality. For this you need a multi-channel
Audio/Video receiver that supports one or more of the
audio formats supported by your unit (MPEG 2, Dolby
Digital and DTS). Check the receiver manual and the
logos on the front of the receiver.
Warning:
Due to the DTS Licensing agreement, the digital output
will be in DTS digital out when DTS audio stream is
selected.
Notes
If the audio format of the digital output does not match
the capabilities of your receiver, the receiver will
produce a strong, distorted sound or no sound at all.
To see the audio format of the current DVD in the On-
Screen Display, press AUDIO.
10
Amplifier (Receiver)
2 channel analog stereo or Dolby Surround connection.
DVD exclusive out Digital multi-channel
connection
Rear of this unit
L
R
AUDIO INPUT
DIGITAL INPUT
COAXIAL
Pb
RF.OUT
AERIAL
AUDIO
OUT
VIDEO OUT
R
L
DIGITAL
AUDIO OUT
DVD EXCLUSIVE OUT
COAXIAL
VHS IN+OUT/DVD OUT
EURO AV2
DECODER
EURO AV1
AUDIO/
VIDEO
DVD/VHS
OUT
Important notes on controlling thisunit
This unit uses one set of controls to operate both DVD
and VCR. The following buttons are helpful in
successfully controlling each part.
11
POWER Button
Press the POWER button on the remote control or
front panel to turn on this unit.
22
DVD Button
Press DVD button on the remote control when you
want to control the DVD.
The DVD indicator will light on the front panel
display to show that the DVD is selected.
33
VHS Button
Press the VHS button on the remote control when
you want to control the VCR.
The VHS indicator will light on the front panel
display to show that the VCR is selected.
44
DVD/VCR Toggle
Press the DVD/VHS SELECT button on the front
panel to toggle control between the DVD and the
VCR.
55
OUTPUT SELECT Button
Select one of your output sources to view on the
TV screen.