Netopia R910 User’s Reference Guide, Setting the IP trap receivers, Viewing IP trap receivers

12-120 User’s Reference Guide

■A cold start trap is generated after the router is reset.

■An interface down trap (ifDown) is generated when one of the router’s interfaces, such as a port, stops functioning or is disabled.

■An interface up trap (ifUp) is generated when one of the router’s interfaces, such as a port, begins functioning.

The Netopia R910 sends traps using UDP (for IP networks).

You can specify which SNMP managers are sent the IP traps generated by the Netopia R910. Up to eight receivers can be set. You can also review and remove IP traps.

To go to the IP Trap Receivers screen, select IP Trap Receivers. The IP Trap Receivers screen appears.

IP Trap Receivers

Display/Change IP Trap Receiver...

Add IP Trap Receiver...

Delete IP Trap Receiver...

Return/Enter to modify an existing Trap Receiver.

Navigate from here to view, add, modify and delete IP Trap Receivers.

Setting the IP trap receivers

1.Select Add IP Trap Receiver.

2.Select Receiver IP Address or Domain Name. Enter the IP address or domain name of the SNMP manager you want to receive the trap.

3.Select Community String. Enter whatever community string is appropriate for the traps to be sent to the management station whose IP address or domain name you entered on the previous line.

4.Select Add Trap Receiver Now and press Return. You can add up to seven more receivers.

Viewing IP trap receivers

To display a view-only table of IP trap receivers, select Display/Change IP Trap Receiver in the IP Trap Receivers screen.

Modifying IP trap receivers

1.To edit an IP trap receiver, select Display/Change IP Trap Receiver in the IP Trap Receivers screen.