
WAN and System Configuration
IP setup
These screens allow you to configure your network’s use of IP.
■Details are given in Chapter 9, “IP Setup and Network Address Translation.”
Filter sets (firewalls)
These screens allow you to configure security on your network by means of filter sets and a basic firewall.
■Details are given in Chapter 13, “Security.”
IP address serving
These screens allow you to configure IP address serving on your network by means of DHCP, WANIP, and BootP.
■Details are given in “IP address serving” on page
Date and time
You can set the system’s date and time in the Set Date and Time screen.
Select Date and Time in the System Configuration screen and press Return. The Set Date and Time screen appears.
Set Date and Time
System Date Format: | MM/DD/YY |
Current Date (MM/DD/YY): | 12/9/1998 |
System Time Format: | AM/PM |
Current Time: | 04:18 |
AM or PM: | PM |
Follow these steps to set the system’s date and time:
1.Select Current Date and enter the date in the appropriate format. Use one- or
2.Select Current Time and enter the time in the format HH:MM, where HH is the hour (using either the