7-40 User’s Reference Guide

IP Easy Setup

The IP Easy Setup screen is where you enter information about your Netopia Router’s:

Ethernet IP address

Ethernet Subnet mask

Domain Name

Domain Name Server IP address

Default gateway IP address

Whether to serve IP addresses or not

Consult with your network administrator to obtain the information you will need. For more information about setting up IP, see “IP Setup and Network Address Translation” on page 9-51.

IP Easy Setup

 

Ethernet IP Address:

192.168.1.1

Ethernet Subnet Mask:

255.255.255.0

Domain Name:

 

Primary Domain Name Server:

173.166.4.10

Secondary Domain Name Server:

0.0.0.0

Default IP Gateway:

173.166.1.1

IP Address Serving:

On

Number of Client IP Addresses:

100

1st Client IP Address:

192.168.1.100

PREVIOUS SCREEN

NEXT SCREEN

Enter an IP address in decimal and dot form (xxx.xxx.xxx.xxx).

Set up the basic IP attributes of your Netopia in this screen.

1.Select Ethernet IP Address and enter the first IP address from the IP address range your ISP has given you. This will be the Netopia Router’s IP address.

If Network Address Translation is enabled in Easy Setup, the Ethernet IP Address defaults to an address within a range reserved by the Internet address administration authority for use within private networks, 192.168.1.1.

Because this is a private network address, it should never be directly connected to the Internet. Using NAT for all your WAN and IP configurations will ensure this restriction. See “IP Setup and Network Address Translation” on page 9-51of this guide for more information.

2.Select Ethernet Subnet Mask and enter the subnet mask your ISP has given you. The Ethernet Subnet Mask defaults to a standard class mask derived from the class of the Ethernet IP address you entered in the previous step.

3.Select Domain Name and enter the domain name your ISP has given you.

Page 40
Image 40
Netopia R910 manual IP Easy Setup, Previous Screen Next Screen