Netopia R910 manual To Main Menu

9-54 User’s Reference Guide

Or, from the Main Menu, select Easy Setup. The Easy Setup WAN Ethernet Configuration screen appears.

WAN Ethernet Configuration

Address Translation Enabled:	Yes
Local WAN IP Address:	0.0.0.0

TO MAIN MENU NEXT SCREEN

Set up the basic IP attributes of your Ethernet Module in this screen.

Toggle Address Translation Enabled to Yes or No (Yes to enable NAT) and press Return.

For more information see Appendix B, “Understanding IP Addressing” and Appendix C, “Understanding Netopia NAT Behavior”

4.If your ISP uses numbered (interface-based) routing, select Local WAN IP Address and enter the local WAN address your ISP gave you. Then select Local WAN IP Mask and enter the WAN subnet mask of the remote site you will connect to.

The default address is 0.0.0.0, which allows for dynamic addressing, meaning that your ISP assigns an address via DHCP each time you connect. However, if you want to use static addressing, enter a specific address.