Manuals / Netopia / Computer Equipment / Network Router

Netopia R910 manual Updating ﬁrmware, Utilities and Diagnostics

Models: R910

1 209

Download 209 pages 33.84 Kb

Page 161

Trivial File Transfer Protocol (TFTP)

Utilities and Diagnostics 14-161

Trivial File Transfer Protocol (TFTP)

TFTP Server Name:

Firmware File Name:

GET ROUTER FIRMWARE FROM SERVER...

GET WAN MODULE FIRMWARE FROM SERVER...

Config File Name:

GET CONFIG FROM SERVER...

SEND CONFIG TO SERVER...

TFTP Transfer State -- Idle

TFTP Current Transfer Bytes -- 0

The sections below describe how to update the Netopia R910’s ﬁrmware and how to download and upload conﬁguration ﬁles.

Updating ﬁrmware

Firmware updates may be available periodically from Netopia or from a site maintained by your organization’s network administrator.

There are two types of ﬁrmware in the Netopia R910 Ethernet Router: router ﬁrmware and WAN module ﬁrmware. The router ﬁrmware governs how the router communicates with your network and the WAN module; the WAN module ﬁrmware governs how the WAN module communicates with the remote site. WAN module ﬁrmware is included on your Netopia CD for XMODEM transfer and later updates will be available on the Netopia website. Router ﬁrmware updates are also periodically posted on the Netopia website.

To update either the router’s or the internal WAN module’s ﬁrmware, follow these steps:

■Select TFTP Server Name and enter the server name or IP address of the TFTP server you will use. The server name or IP address is available from the site where the server is located.

■Select Firmware File Name and enter the name of the ﬁle you will download. The name of the ﬁle is available from the site where the server is located. You may need to enter a ﬁle path along with the ﬁle name (for example, bigroot/conﬁg/myﬁle).

■Select GET ROUTER FIRMWARE FROM SERVER or GET WAN MODULE FIRMWARE FROM SERVER and

Image 161

Netopia R910 manual Updating ﬁrmware, Utilities and Diagnostics, Trivial File Transfer Protocol TFTP TFTP Server Name

Contents

User’s Reference Guide Netopia R910 Ethernet Router for DSL and Cable ModemsPrinted Copies CopyrightPart Number Features and capabilities ContentsHow to use this guide Chapter 2 - Setting Up Internet ServicesChapter 7 - Easy Setup Connecting a console cable to your routerEasy Setup console screens Accessing the Easy Setup console screensVPN Default Answer Proﬁle DHCP NetBIOS OptionsInstalling Dial-Up Networking Installing the VPN ClientTelnet access The SNMP Setup screenChapter 12 - Monitoring Tools 12-109Factory defaults Chapter 14 - Utilities and DiagnosticsAppendix A - Troubleshooting Conﬁguration problemsExported services Using address servingAppendix F - Technical Speciﬁcations and Safety Power requirements“Features and capabilities” on page “How to use this guide” on page Features and capabilitiesChapter Introduction Overview1-10 User’s Reference Guide How to use this guideSetting Up Internet Services Chapter Setting Up Internet ServicesDeciding on an ISP account DSL and cable modems2-12 User’s Reference Guide Local LAN IP address information to obtainWith Network Address Translation Without Network Address TranslationChapter Making the Physical Connections “Identify the connectors and attach the cables” on pageFind a location Making the Physical Connections3-14 User’s Reference Guide Identify the connectors and attach the cablesWhat you need Making the Physical Connections Netopia R910 Ethernet Router back panel portsyour router” on page 8 9 10 12 13 14 15 16 Netopia R910 Ethernet Router status lights3-16 User’s Reference Guide Connecting to Your Local Area Network Chapter Connecting to Your Local Area Network“Connecting to an Ethernet network” on page Network ModelAfter Readying computers on your local network4-18 User’s Reference Guide Application software TCP/IP stack Ethernet/EtherTalk Driver Your PC Connecting to Your Local Area Network4-20 User’s Reference Guide Connecting to an Ethernet network10Base-T The Netopia R910 in a 10Base-T network with a hub Connecting to Your Local Area NetworkThe Netopia R910 in a 10Base-T network 4-22 User’s Reference Guide Hardware and operating system requirements Chapter Configuring TCP/IPConﬁguring TCP/IP “Hardware and operating system requirements” on pageDynamic conﬁguration recommended Conﬁguring TCP/IP on Windows 95 or5-24 User’s Reference Guide Conﬁguring TCP/IP Static conﬁguration optionalDynamic conﬁguration recommended Conﬁguring TCP/IP on a Macintosh Computer5-26 User’s Reference Guide 1. Go to the Apple menu. Select Conﬁguring TCP/IPStatic conﬁguration optional 5-28 User’s Reference Guide Dynamic conﬁguration using MacIP optionalConﬁguring TCP/IP 5-30 User’s Reference Guide “Connecting a console cable to your router” on page “Connecting through a Telnet session” on pageChapter Console-Based Management Console-Based ManagementUpgrade feature set. See “Upgrade feature set” on page Connecting through a Telnet session6-32 User’s Reference Guide Filter sets ﬁrewalls. See “About ﬁlters and ﬁlter sets” on pageConsole-Based Management Connecting a console cable to your routerConﬁguring Telnet software 6-34 User’s Reference Guide Navigating through the console screensEasy Setup console screens Chapter Easy SetupAccessing the Easy Setup console screens Easy Setup7-36 User’s Reference Guide See Appendix A, “Troubleshooting,” for more suggestionsIf your ISP supports DHCP Quick Easy Setup connection pathIf your ISP doesn’t support DHCP Easy Setup7-38 User’s Reference Guide For more Easy Setup options see “More Easy Setup options” on pageEasy Setup More Easy Setup optionsWAN Ethernet Conﬁguration 7-40 User’s Reference Guide IP Easy SetupEasy Setup Easy Setup Security Conﬁguration1. Select RESTART DEVICE. A prompt asks you to conﬁrm your choice 7-42 User’s Reference GuideEasy Setup is now complete “System conﬁguration features” on page Chapter WAN and System ConfigurationWAN conﬁguration WAN and System Conﬁguration8-44 User’s Reference Guide System conﬁguration screensWAN and System Conﬁguration Navigating through the system conﬁguration screens8-46 User’s Reference Guide System conﬁguration featuresFilter sets ﬁrewalls IP setupIP address serving Date and timeConsole conﬁguration Upgrade feature setSNMP Simple Network Management Protocol SecurityWAN and System Conﬁguration Logging8-50 User’s Reference Guide Installing the Syslog clientNetwork Address Translation features Chapter IP Setup and Network Address TranslationIP Setup and Network Address Translation “Network Address Translation features” on pageHOW NAT WORKS With NAT ISP 163.167.132.1 Without NAT 9-52 User’s Reference Guideor corporate intranet router 192.168.1.100 192.168.1.102 192.168.1.103 192.168.1.104 192.168.1.105IP Setup and Network Address Translation Using Network Address TranslationNote See “Associating port numbers with nodes” on page 9-54 User’s Reference Guide IP Setup and Network Address Translation Associating port numbers with nodesNetwork Address Translation guideline IP setup 9-56 User’s Reference GuideIP Setup and Network Address Translation Select Add Export. The Add Exported Service screen appears 9-58 User’s Reference GuideCANCEL Exports, Add Export, and Delete ExportSelect Service. A pop-up menu of services and ports appears IP Setup and Network Address Translation9-60 User’s Reference Guide IP subnetsFor example IP Setup and Network Address Translationpage Static routes9-62 User’s Reference Guide IP Setup and Network Address Translation Viewing static routesAdding a static route 9-64 User’s Reference GuideModifying a static route Rules of static route installationDeleting a static route IP Setup and Network Address TranslationIP address serving 9-66 User’s Reference GuideServe DHCP Clients Serve BootP Clients Serve Dynamic WAN Clients Follow these steps to conﬁgure IP Address Serving IP Setup and Network Address Translation9-68 User’s Reference Guide IP Address PoolsNumerous factors inﬂuence the choice of served address. It is difﬁcult to specify the address that will be served to a particular client in all circumstances. However, when the address server has been conﬁgured, and the clients involved have no prior address serving interactions, the Netopia R910 will generally serve the ﬁrst unused address from the ﬁrst address pool with an available address. The Netopia R910 starts from the pool on the ﬁrst row and continues to the pool on the last row of this screen IP Setup and Network Address Translation9-70 User’s Reference Guide DHCP NetBIOS OptionsIP Setup and Network Address Translation You have ﬁnished your IP setup 9-72 User’s Reference GuideSelect Release BootP Leases and press Return “Installing the VPN Client” on page “About ATMP Tunnels” on page “VPN Default Answer Proﬁle” on page “VPN QuickView” on pageChapter Virtual Private Networks VPN Virtual Private Networks VPNTransi t In t ern etwor k 10-74 User’s Reference Guide“About ATMP Tunnels” on page “About PPTP Tunnels” on page “About IPsec Tunnels” on pageSummary Virtual Private Networks VPN10-76 User’s Reference Guide PPTP configurationAbout PPTP Tunnels Virtual Private Networks VPN Note Proﬁles using PPTP do not offer a Telco Options screen10-78 User’s Reference Guide Virtual Private Networks VPN Encryption SupportMS-CHAP V2 and strong encryption 10-80 User’s Reference Guide ConfigurationAbout IPsec Tunnels The Add Connection Proﬁle screen appears Virtual Private Networks VPN10-82 User’s Reference Guide Virtual Private Networks VPN IP Profile Parameters10-84 User’s Reference Guide Advanced IP Profile OptionsVirtual Private Networks VPN VPN Default Answer Profile10-86 User’s Reference Guide Interoperation with other featuresVPN QuickView Proﬁle Name Lists the name of the Connection Proﬁle being used, if any Virtual Private Networks VPN10-88 User’s Reference Guide Installing Dial-Up NetworkingDial-Up Networking for VPN Virtual Private Networks VPN Creating a new Dial-Up Networking profile10-90 User’s Reference Guide Configuring a Dial-Up Networking profileVirtual Private Networks VPN 4. Click the TCP/IP Settings buttonWindows 95 VPN installation Installing the VPN ClientWindows 98 VPN installation 10-92 User’s Reference GuideVirtual Private Networks VPN Connecting using Dial-Up Networking10-94 User’s Reference Guide ATMP configurationAbout ATMP Tunnels Virtual Private Networks VPN Note Proﬁles using ATMP do not offer a Telco Options screen10-96 User’s Reference Guide Virtual Private Networks VPN “PPTP example” on page “ATMP example” on page Allowing VPNs through a Firewall10-98 User’s Reference Guide Display/Change Input Filter screen PPTP exampleVirtual Private Networks VPN 10-100 User’s Reference Guide 0.0.0.0 Virtual Private Networks VPN0.0.0.0 0.0.0.010-102 User’s Reference Guide ATMP exampleVirtual Private Networks VPN 0.0.0.0 10-104 User’s Reference Guide0.0.0.0 0.0.0.0PPP over Ethernet Chapter PPP over Ethernet11-106 User’s Reference Guide Configuration PPP Ethernet LAN ReconfigurationThe Netopia R910 offers the ability for PPP to reconﬁgure the router’s Ethernet LAN when establishing an unnumbered, non-NAT connection PPP over Ethernet11-108 User’s Reference Guide Quick ViewQuick View status overview Chapter Monitoring ToolsMonitoring Tools “Quick View status overview” on page “Statistics & Logs” on page12-110 User’s Reference Guide General statusStatus lights Monitoring Tools Statistics & LogsGeneral Statistics 12-112 User’s Reference Guide Event historiesPhysical Interface Network InterfaceMonitoring Tools WAN Event HistoryDevice Event History 12-114 User’s Reference Guide Routing tablesMonitoring Tools IP routing table12-116 User’s Reference Guide Served IP AddressesMonitoring Tools System Information12-118 User’s Reference Guide The SNMP Setup screenSNMP Monitoring Tools SNMP trapsCommunity strings 12-120 User’s Reference Guide Setting the IP trap receiversViewing IP trap receivers Modifying IP trap receiversMonitoring Tools Deleting IP trap receivers12-122 User’s Reference Guide Chapter Security “Telnet access” on page “About ﬁlters and ﬁlter sets” on pageSuggested security measures User accountsProtecting the conﬁguration screens 13-124 User’s Reference GuideProtecting the Security Options screen Security Telnet accessWhat’s a ﬁlter and what’s a ﬁlter set? About ﬁlters and ﬁlter setsHow ﬁlter sets work 13-126 User’s Reference GuideSecurity Filter prioritypacket first filter match? send to next filter yes pass or discard? discard delete pass13-128 User’s Reference Guide How individual ﬁlters workA ﬁlter’s actions A ﬁltering rulePort numbers Parts of a ﬁlterPort number comparisons SecurityPutting the parts together 13-130 User’s Reference GuideOther ﬁlter attributes Security Filtering example #1Filtering example #2 Design guidelines13-132 User’s Reference Guide Working with IP ﬁlters and ﬁlter sets An approach to using ﬁltersDisadvantages of ﬁlters Security13-134 User’s Reference Guide Adding a ﬁlter setSecurity Naming a new ﬁlter setAdding ﬁlters to a ﬁlter set 13-136 User’s Reference GuideInput and output ﬁlters-source and destination Security 1. To make the ﬁlter active in the ﬁlter set, select Enabled and toggle it to Yes. If Enabled is toggled to No, the ﬁlter can still exist in the ﬁlter set, but it will have no effect13-138 User’s Reference Guide Viewing ﬁlter setsViewing ﬁlters Modifying ﬁltersDeleting a ﬁlter set Modifying ﬁlter setsA sample IP ﬁlter set Security13-140 User’s Reference Guide Security Possible modiﬁcations13-142 User’s Reference Guide Basic IP packet components Firewall tutorial General ﬁrewall termsBasic protocol types Security13-144 User’s Reference Guide Firewall design rulesExample TCP/UDP Ports Firewall LogicLogical AND function Binary representationImplied rules Security13-146 User’s Reference Guide Filter basicsEstablished connections Example IP ﬁlter set screenIncoming Packet Filter Example ﬁltersNetopia InternetExample 13-148 User’s Reference GuideExample Example SecurityExample 13-150 User’s Reference Guide Security RADIUS client configurationRADIUS Client Support RADIUS Server Authentication Port 13-152 User’s Reference GuideRADIUS then Local Local then RADIUSAdvanced Security Options be unable to configure this device unless a Radius Server isSecurity 13-154 User’s Reference Guide Utilities and Diagnostics Chapter Utilities and Diagnostics“Factory defaults” on page “Ping” on page “Trace Route” on page “Telnet client” on page14-156 User’s Reference Guide PingUtilities and Diagnostics 14-158 User’s Reference Guide Trace RouteUtilities and Diagnostics Telnet clientDisconnect Telnet console session Factory defaultsTransferring conﬁguration and ﬁrmware ﬁles with TFTP 14-160 User’s Reference GuideUtilities and Diagnostics Updating ﬁrmwareGET WAN MODULE FIRMWARE FROM SERVER Config File Name GET CONFIG FROM SERVER SEND CONFIG TO SERVER14-162 User’s Reference Guide Downloading conﬁguration ﬁlesUtilities and Diagnostics Uploading conﬁguration ﬁlesTransferring conﬁguration and ﬁrmware ﬁles with XMODEM Updating ﬁrmware 14-164 User’s Reference GuideUploading conﬁguration ﬁles Utilities and DiagnosticsDownloading conﬁguration ﬁles 14-166 User’s Reference Guide Restarting the systemConﬁguration problems Appendix A TroubleshootingTroubleshooting A-167 “Conﬁguration problems” on page A-167Network problems Console connection problemsProblems communicating with remote IP hosts Local routing problemsPower outages How to reset the router to factory defaultsReset Switch Slot Troubleshooting A-169Technical support How to reach usA-170 User’s Reference Guide Before contacting NetopiaOnline Technical Support Troubleshooting A-171Online product information A-172 User’s Reference Guide “What is IP?” on page B-173 “About IP addressing” on page B-173 What is IP?Appendix B Understanding IP Addressing About IP addressingB-174 User’s Reference Guide Subnets and subnet masksSubnet masks Example Using subnets on a Class C IP internetUnderstanding IP Addressing B-175 Network conﬁguration B-176 User’s Reference GuideCustomer Site A ISP NetworkDistributing IP addresses Example Working with a Class C subnetUnderstanding IP Addressing B-177 BackgroundB-178 User’s Reference Guide Technical note on subnet maskingConﬁguration Netopia R910 DHCP server characteristicsUnderstanding IP Addressing B-179 DHCP address servingManually distributing IP addresses Using address servingTips and rules for distributing IP addresses B-180 User’s Reference GuideUnderstanding IP Addressing B-181 A DHCP example Nested IP subnetsB-182 User’s Reference Guide Internet Understanding IP Addressing B-183B-184 User’s Reference Guide Understanding IP Addressing B-185 BroadcastsPacket header types B-186 User’s Reference Guide Network conﬁguration Appendix C Understanding Netopia NAT BehaviorBackground ISP NetworkC-188 User’s Reference Guide Workstation A Understanding Netopia NAT Behavior C-189Workstations C-190 User’s Reference GuideUnderstanding Netopia NAT Behavior C-191 Exported servicesC-192 User’s Reference Guide Important notesConﬁguration Understanding Netopia NAT Behavior C-193C-194 User’s Reference Guide SummaryBinary Conversion Table D-195 Appendix D Binary Conversion TableDecimal D-196 User’s Reference GuideBinary DecimalFurther Reading E-197 Appendix E Further ReadingE-198 User’s Reference Guide Further Reading E-199 E-200 User’s Reference Guide Power requirements Appendix F Technical Specifications and Safety InformationTechnical Speciﬁcations and Safety Information F-201 DescriptionDeclaration for Canadian users Regulatory noticesF-202 User’s Reference Guide Technical Speciﬁcations and Safety Information F-203 Important safety instructionsTelecommunication installation cautions BatteryF-204 User’s Reference Guide Index-205 IndexNumerics Index-206 Index-207 Index-208 13-131Index-209