Statistics & Logs, General Statistics | Netopia R910 instruction

Monitoring Tools 12-111

Each LED representation can report one of four states: –:A dash means the LED is off.

R:The letter “R” means the LED is red.

G:The letter “G” means the LED is green.

Y:The letter “Y” means the LED is yellow.

The section “Netopia R910 Ethernet Router status lights” on page 3-16 describes the meanings of the colors for each LED.

Note: Although the Quick VIew LED Status section lists the Channel 2 (CH2) LED, it is not used on the R910.

Statistics & Logs

Main

Menu

Statistics & Logs

• General Statistics

When you are troubleshooting your Netopia R910, the Statistics & Logs screens provide insight into the recent event activities of the router.

From the Main Menu go to Statistics & Logs and select one of the options described in the sections below.

General Statistics

To go to the General Statistics screen, select General Statistics and press Return. The General Statistics screen appears.

		General Statistics
Phys I/F---------	Rx Bytes---	Tx Bytes---	Rx Pkts---	Tx Pkts----	Rx Err----	Tx Err
Ethernet Hub	123456789	123456789	12345678	12345678	12345678	12345678
Ethernet Wan1	123456789	123456789	12345678	12345678
Network----------	Rx Bytes---	Tx Bytes---	Rx Pkts---	Tx Pkts----	Rx Err----	Tx Err
IP	123456789	123456789	12345678	12345678	12345678	12345678

The General Statistics screen displays information about data trafﬁc on the Netopia R910’s data ports. This information is useful for monitoring and troubleshooting your LAN. Note that the counters roll over at their maximum ﬁeld width, that is, they restart again at 0.

Image 111

Netopia R910 manual Statistics & Logs, General Statistics

Contents

Netopia R910 Ethernet Router for DSL and Cable Modems Part Number Contents Iv User’s Reference Guide Contents Snmp Contents Index Features and capabilities Chapter IntroductionOverview How to use this guide Obtaining information from the ISP Chapter Setting Up Internet ServicesDeciding on an ISP account DSL and cable modems Local LAN IP address information to obtain With Network Address TranslationWithout Network Address Translation Find a location Chapter Making the Physical Connections Identify the connectors and attach the cables What you needLine 1 port Your router on Netopia R910 Ethernet Router back panel ports 10 12 13 14 15 16 Netopia R910 Ethernet Router status lights Chapter Connecting to Your Local Area Network Network ModelBefore After Readying computers on your local network Connecting to Your Local Area Network Connecting to an Ethernet network Power port Console port10Base-T Netopia R910 in a 10Base-T network User’s Reference Guide Hardware and operating system requirements Chapter Configuring TCP/IP Dynamic conﬁguration recommended Conﬁguring TCP/IP on Windows 95 or Static conﬁguration optional Conﬁguring TCP/IP on a Macintosh Computer Static conﬁguration optional Dynamic conﬁguration using MacIP optional Conﬁguring TCP/IP User’s Reference Guide Chapter Console-Based Management Snmp Simple Network Management Protocol. See Snmp on Connecting through a Telnet session Conﬁguring Telnet software Connecting a console cable to your router Mac ANSI, VT-100, or VT-200 Navigating through the console screens Chapter Easy Setup Easy Setup console screensAccessing the Easy Setup console screens Screen similar to the following Main Menu appears Quick Easy Setup connection path If your ISP supports DhcpIf your ISP doesn’t support Dhcp Main Menu appears WAN Ethernet Conﬁguration More Easy Setup options Previous Screen Next Screen IP Easy Setup Easy Setup Security Conﬁguration User’s Reference Guide WAN conﬁguration Chapter WAN and System Configuration System conﬁguration screens Navigating through the system conﬁguration screens System conﬁguration features Date and time IP setupFilter sets ﬁrewalls IP address serving Security Upgrade feature setConsole conﬁguration Snmp Simple Network Management Protocol Logging Installing the Syslog client Network Address Translation features Chapter IP Setup and Network Address Translation HOW NAT Works Using Network Address Translation To Main Menu Network Address Translation guideline Associating port numbers with nodes IP Setup Ethernet IP Address IP Setup and Network Address Translation Exports, Add Export, and Delete Export Select Add Export. The Add Exported Service screen appears Select Service. a pop-up menu of services and ports appears IP subnets IP Setup and Network Address Translation Static routes Viewing static routes Static Routes screen will appear Adding a static route Rules of static route installation Modifying a static routeDeleting a static route Main Menu System Configuration IP Address Serving Dhcp NetBios Options Serve Bootp Clients IP Address Pools IP Setup and Network Address Translation Dhcp NetBIOS Options NetBios Type User’s Reference Guide Chapter Virtual Private Networks VPN Transi t In t ern etwor k Summary Pptp configuration Configuration Add Connection ProfileAbout Pptp Tunnels Chap User’s Reference Guide Encryption Support IP Proﬁle Parameters screen appearsMS-CHAP V2 and strong encryption About IPsec Tunnels Configuration Add Connection Proﬁle screen appears IPsec Encryption & Authentication Options IP Profile Parameters Following section Advanced IP Profile Options VPN Default Answer Profile Interoperation with other features VPN QuickViewQuickView Virtual Private Networks VPN Dial-Up Networking for VPN Installing Dial-Up Networking Creating a new Dial-Up Networking profile Configuring a Dial-Up Networking profile Virtual Private Networks VPN Installing the VPN Client Windows 95 VPN installationWindows 98 VPN installation Connecting using Dial-Up Networking About Atmp Tunnels Atmp configuration Pptp Commitcancel User’s Reference Guide Local WAN IP Address 0.0 Remote IP Address Pptp example on Atmp example on Allowing VPNs through a Firewall Pptp example Change Input Filter EnabledYes ForwardYes Source IP Address Change Output Filter EnabledYes ForwardYes Source IP Address Atmp example Source Port ID Dest. Port Compare Change Output Filter EnabledYes ForwardYes Source IP Address Chapter PPP over Ethernet Setup EN WAN Module Add Connection PPP Ethernet LAN Reconfiguration Quick View Quick View status overview Chapter Monitoring Tools Status lights General status General Statistics Statistics & Logs Event histories Physical InterfaceNetwork Interface Device Event History WAN Event History Routing tables Scroll Down IP routing table Served IP Addresses System Information Snmp Snmp Setup screen Community strings Snmp traps Setting the IP trap receivers Viewing IP trap receiversModifying IP trap receivers Deleting IP trap receivers User’s Reference Guide Chapter Security Suggested security measuresUser accounts Protecting the conﬁguration screens Protecting the Security Options screen Telnet access About ﬁlters and ﬁlter sets What’s a ﬁlter and what’s a ﬁlter set?How ﬁlter sets work Filter priority How individual ﬁlters work ﬁlter’s actionsﬁltering rule Who 513 Parts of a ﬁlterPort numbers 161 Aurp AppleTalk 387 Putting the parts together Other ﬁlter attributes Filtering example #1 Internet Control Message ProtocolTransmission Control Protocol User Datagram Protocol Filtering example #2 Design guidelines An approach to using ﬁlters Working with IP ﬁlters and ﬁlter setsDisadvantages of ﬁlters Adding a ﬁlter set Naming a new ﬁlter set Input and output ﬁlters-source and destination Netopia R910 RouterAdding ﬁlters to a ﬁlter set ADD this Filter NOW Cancel Deleting ﬁlters Viewing ﬁlter setsViewing ﬁlters Modifying ﬁlters Modifying ﬁlter sets Deleting a ﬁlter setSample IP ﬁlter set TCP Icmp UDP Possible modiﬁcations User’s Reference Guide ACK Bit Yes Firewall tutorial General ﬁrewall termsBasic IP packet components Basic protocol types Firewall design rules Example TCP/UDP PortsFirewall Logic Binary representation Logical and functionImplied rules This is an example of the Netopia IP ﬁlter set screen Filter basicsEstablished connections Example IP ﬁlter set screen Example ﬁlters Example networkExample Example Example User’s Reference Guide Radius Client Support Radius client configuration Radius Server Secret Continue Cancel Continue Chapter Utilities and Diagnostics Start Ping Ping Receive return Ping packet Stop Ping Trace Route Telnet client Factory defaults Disconnect Telnet console sessionTransferring conﬁguration and ﬁrmware ﬁles with Tftp Updating ﬁrmware Press Return. You will see the following dialog box Downloading conﬁguration ﬁles Transferring conﬁguration and ﬁrmware ﬁles with Xmodem Uploading conﬁguration ﬁles Idle Do you want to send a saved configuration to your Netopia? Restarting the system Conﬁguration problems Appendix a Troubleshooting Network problems Console connection problems Power outages How to reset the router to factory defaults Environment proﬁle How to reach usTechnical support Before contacting Netopia Online product information Product information can be found in the followingOnline Technical Support User’s Reference Guide What is IP? Appendix B Understanding IP AddressingAbout IP addressing Subnets and subnet masks Subnet masks Example Using subnets on a Class C IP internet ISP Network Network conﬁguration Example Working with a Class C subnet Distributing IP addressesBackground 255.255.255.224 Technical note on subnet masking Dhcp address serving Netopia R910 Dhcp server characteristicsConﬁguration 255.255.255.0 MacIP serving Using address servingManually distributing IP addresses Tips and rules for distributing IP addresses Understanding IP Addressing B-181 Dhcp example Nested IP subnets Internet 0.0 C.1 WAN 3719 Packet header types Broadcasts User’s Reference Guide Appendix C Understanding Netopia NAT Behavior Network conﬁgurationBackground User’s Reference Guide Understanding Netopia NAT Behavior C-189 Router Netopia Understanding Netopia NAT Behavior C-191 Exported services Important notes Understanding Netopia NAT Behavior C-193 Summary Appendix D Binary Conversion Table Decimal Binary Appendix E Further Reading User’s Reference Guide Further Reading E-199 User’s Reference Guide Appendix F Technical Specifications and Safety Information Declaration for Canadian users Regulatory notices Important safety instructions Telecommunication installation cautionsBattery User’s Reference Guide Deﬁned B-180 Index Index-206 Index-207 SmartIP Index-208 Index-209