JVC LVT1504-005B 7Connecting the center speaker - TH-C60, Assembled speakers, Before assembling

Connections

Do not connect the power cord until all other connections have been made.

7Assembling the front and surround speakers — TH-C60

		Stand (4)	Base plate (4)
Front speaker	Surround
(SP-THC60F) (2)	speaker
	(SP-THC60S) (2)

•Check the model name of each speaker from the label on the rear to locate each speaker correctly.

Assembled speakers

or

With stand: Refer to steps 1 to	Without stand: Refer to steps
3.	2 and 3.

Before assembling —

•Prepare a Phillips screwdriver (not supplied).

•Take care not to drop any component part while assembling; otherwise, it may cause damage to the floor or injury.

1

Speaker

Stand

Screw M5 x 40 mm (supplied)

2When assembling a speaker without stand:

Speaker

3

Red White

Black Black

You can route the speaker cord by using speaker cord clamp (supplied).

7Connecting the center speaker — TH-C60

Center speaker (SP-THC60C) (1)

Red White

Black Black

Stand (or speaker directly)*

A: Use these screws (M4 x

45 mm) when assembling the speaker with the base plate.

Base plate

Screw M4 x 20 mm (supplied)*

For TH-C20, the front, surround and center speakers are equipped with their speaker cords attached directly to their speaker unit instead of having speaker terminals on their cabinet.

*When assembling the speaker with the base plate, use the screws A.

10