Advanced operations
See page 26 for button locations.
Repeating a desired part
You can repeat playback of a desired part by specifying the beginning (point A) and ending (point B).
7 During playback
1 Press ON SCREEN twice.
The
2 Press Cursor 3/2 to highlight 
. 3 Press ENTER.
4 Press Cursor Y/5 repeatedly to select “A-B”.
5 Press ENTER at the beginning of the part you want to repeat (point A).
The repeat mode indicator “
” appears on the display window.
6 Press ENTER at the end of the part you want to repeat (point B).
The repeat mode indicator on the display window changes to
“ ” and
7Press ON SCREEN.
The
To cancel
Select “OFF” in step 4, then press ENTER.
NOTE
•When playing back a DVD VIDEO/DVD VR,
•
•
Tray lock
You can lock the tray and prohibit unwanted disc ejection.
On the center unit ONLY:
7While the system is turned off
Press and hold
•“LOCKED” appears on the display window.
•If you try to eject the disc, “LOCKED” appears to indicate that the tray is locked.
To cancel
Carry out the same operation again.
• “UNLOCKED” appears on the display window.
Setting the sound balance
IMPORTANT
Before using the remote control for the following operation;
• Set the remote control mode selector to AUDIO.
NOTE
• Before you start operation; There is a time limit when
doing the following steps. If the setting is canceled before you finish, start from step 1 again.
1 Press SETTING.
2Press Cursor 3/2 to make an
adjustment or selection.
You can adjust the balance of the sound between “R (right)
The adjustment is set and the display automatically disappears a few seconds later.
36
