References

Maintenance

7Handling Discs

Remove the disc from its case by holding it at the edge while pressing the center hole lightly.

Do not touch the shiny surface of the disc or bend the disc.

Put the disc back in its case after use to prevent warping.

Be careful not to scratch the surface of the disc when placing it back in its case.

Avoid exposure to direct sunlight, extreme temperature and moisture.

To clean the disc

Wipe the disc with a soft cloth in a straight line from center to edge.

DO NOT use any solvent — such as conventional record cleaner, spray, thinner or benzine — to clean the disc.

7Cleaning the system

Stains on the system should be wiped off with a soft cloth. If the system is heavily stained, wipe it with a cloth soaked in water- diluted neutral detergent and wrung well, then wipe clean with a dry cloth.

Since the system may deteriorate in quality, become damaged or get its paint peeled off, be careful about the following.

DO NOT wipe it with a hard cloth.

DO NOT wipe it forcefully.

DO NOT wipe it with thinner or benzine.

DO NOT apply any volatile substance such as insecticides to it.

DO NOT allow any rubber or plastic to remain in contact with it for a long time.

Troubleshooting

PROBLEM

POSSIBLE CAUSE

SOLUTION

 

 

 

Power does not come on.

The power cord and/or system cord is not connected.

Connect the power cord and system cord correctly. (See

 

 

pages 14 and 15.)

The remote control does

The batteries are exhausted.

Replace the batteries. (See page 7.)

not work.

 

 

Sunlight is shining directly on the remote sensor.

Hide the remote sensor from direct sunlight.

 

No sound.

The system cord and/or speaker cord is not connected.

Check the connection.

 

The audio cord is not connected to AUX IN (VCR),

Connect the cord correctly. (See page 14.)

 

TAPE IN (only for TH-C90) and/or DIGITAL IN (DBS)

 

 

correctly.

 

 

An incorrect source has been selected.

Select the correct source. (See page 19.)

No picture is displayed

The video cord is not connected correctly.

Connect the cord correctly. (See page 13.)

on the TV screen.

 

 

The disc or file is not playable.

Use a playable disc or file. (See pages 3 and 4.)

 

 

 

 

No picture is displayed

The scan mode is set to the progressive mode

Change the scan mode to the interlace mode

on the TV screen, the

(“NT. 480P” or “PAL. 576P”) though the center unit is

(“NT. 480I” or “PAL. 576I”). (See page 20.)

picture is blurred, or the

connected to the TV which does not support the

 

picture is divided into

progressive video input such as a conventional TV.

 

two parts.

 

 

Video and audio are

The disc is scratched or dirty.

Replace or clean the disc.

distorted.

 

 

A VCR is connected between the center unit and the

Connect the center unit and TV directly. (See page 13.)

 

 

TV.

 

 

 

 

The picture does not fit

The monitor type is not set correctly.

Set “MONITOR TYPE” properly. (See page 38.)

the TV screen.

 

 

The broadcast is hard to

Antennas are disconnected.

Reconnect the antennas correctly and securely. (See

hear because of noise.

 

page 8.)

If there are any other cases than the noted above or if this system does not seem to work properly, turn off the system and turn it back on.

44

Page 47
Image 47
JVC LVT1504-005B manual References, Maintenance, Troubleshooting, Handling Discs, Cleaning the system

LVT1504-005B specifications

The JVC LVT1504-005B is a cutting-edge audio speaker set that stands out in the competitive landscape of home audio technology. Designed to elevate your listening experience, it combines advanced engineering and sleek aesthetics to deliver outstanding sound quality.

One of the most notable features of the JVC LVT1504-005B is its sophisticated sound reproduction capabilities. It is equipped with high-performance drivers that produce a well-rounded sound profile, ensuring that both high and low frequencies are rendered with clarity. This provides an immersive audio experience, whether you are watching movies, listening to music, or playing video games.

The speaker set integrates advanced technologies such as Dolby Digital and DTS support, allowing for exceptional surround sound experiences. With these technologies, the JVC LVT1504-005B is capable of creating a three-dimensional soundstage that brings content to life. Whether you’re in the middle of an action-packed movie or enjoying a live concert recording, the depth and clarity of sound are truly impressive.

In terms of design, the JVC LVT1504-005B features a modern and elegant look that can seamlessly blend into any home décor. Its compact form factor allows for versatile placement options, making it suitable for a variety of spaces. The build quality is robust, ensuring durability while maintaining an aesthetic appeal.

The connectivity options are also noteworthy in this speaker system. The JVC LVT1504-005B comes with multiple input options, including Bluetooth capability for wireless streaming. This feature enables users to easily connect their smartphones, tablets, or other devices to enjoy their favorite music without the hassle of wires.

Moreover, the speaker set is designed to be user-friendly, with intuitive controls that make adjusting settings convenient. The inclusion of remote control functionality adds to its ease of use, allowing you to manage your sound experience from a distance.

In summary, the JVC LVT1504-005B speaker set brings together advanced sound technologies, elegant design, and versatile connectivity to enhance your audio experience at home. Whether you are a casual listener or an audiophile, this speaker system is poised to deliver performance and aesthetics that meet your audio needs. With its impressive range of features, it represents a strong choice for those seeking quality sound in their living spaces.