JVC LVT1504-005B Resume Playback, Selecting a view angle, Selecting the subtitle, Press ENTER

Advanced operations

See page 26 for button locations.

Resume Playback

When Resume Playback is set to “ON” (see page 39) and you stop playback by the following operations, the position where playback has been stopped is stored. (The RESUME indicator lights on the display window.)

•Turning off the power (See page 18.)

•Pressing 7 once

•Changing the source (See page 19.)

To start playback from the stored position

Press 3 (play button) or corresponding source button (DVD or USB MEMORY).

•There may be a case when 3 (play button) does not work after changing the source. In this case, select DVD or USB MEMORY as a source.

•Pressing DISC (1-5)(with SHIFT pressed) on the remote control or DISC (1-5) 3 on the center unit also resumes disc playback.

To clear the stored position

Press 7 again.

•Opening the disc tray with the playback disc or disconnecting the USB mass storage class device also clears the stored position.

NOTE

•(For DivX) The beginning of a scene where playback has been stopped may be stored.

Selecting a view angle

7During playback of a disc containing multi-view

angles

When using the ANGLE button:

1Press ANGLE with SHIFT pressed.

Example: The first view angle is selected out of 3 view angles recorded.

2Press ANGLE repeatedly with SHIFT pressed, or press Cursor Y/5 to select the desired view angle.

When using the on-screen bar:

1Press ON SCREEN twice.

2	The on-screen bar appears on the TV screen.
	Press Cursor 3/2 to highlight	.
3	Press ENTER.

4 Press Cursor Y/5 to select the desired view angle.

5 Press ENTER.

6 Press ON SCREEN.

The on-screen bar disappears.

NOTE

•During DVD AUDIO playback, this feature is available only for the video part.

Selecting the subtitle

7During playback of a disc/file containing

subtitles in several languages

When using the SUBTITLE button:

1Press SUBTITLE.

Example (DVD VIDEO): “ENGLISH” is selected out of 3 subtitle languages recorded.

2Press Cursor Y/5 to select the desired subtitle.

For DVD VR

•Pressing SUBTITLE activates the subtitles (subpictures) regardless of whether the subtitles are recorded or not. (Subpictures will not change if no subpicture is recorded.)

For SVCD

•An SVCD can contain up to four subtitles. Pressing SUBTITLE changes the subtitles regardless of whether the subtitles are recorded or not. (Subtitles will not change if no subtitle is recorded.)

When using the on-screen bar:

1Press ON SCREEN twice.

2	The on-screen bar appears on the TV screen.
	Press Cursor 3/2 to highlight	.
3	Press ENTER.

4 Press Cursor Y/5 repeatedly to select the desired subtitle.

5 Press ENTER.

6 Press ON SCREEN.

The on-screen bar disappears.

NOTE

•To clear the subtitle, press SUBTITLE. Each time you press SUBTITLE, subtitle appears and disappears alternately.

•Some subtitle or audio languages are abbreviated in the pop-up window. See “The language codes list”. (See page 37.)

•During DVD AUDIO playback, this feature is available only for the video part.

•For DivX, you cannot operate this procedure using the on-screen bar.

31