JVC SP-MXC55 Loading CDs, Playing Back CDs-AllDisc and One Disc, When playing a CD-Ror CD-RW

Playing Back CDs

This unit has been designed to playback the following CDs:

¥Audio CD

¥CD-R (CD-Recordable)

¥CD-RW (CD-ReWritable)

¥MP3/WMA disc (MP3/WMA files recorded on a CD-R or CD-RW)*

When playing a CD-R or CD-RW

¥User-edited CD-Rs (CD-Recordable) and CD-RWs (CD-ReWritable) can be played back when they are already Òfinalized.Ó

¥Before playing back CD-Rs or CD-RWs, read their instructions or cautions carefully.

¥Some CD-Rs or CD-RWs may not be played back on this unit because of their disc characteristics, damage or stain on them, or if the playerÕs lens is dirty.

Important notices:

¥In general, you will have the best performance by keeping your CDs and the mechanism clean.

-Store CDs in their cases, and keep them in cabinets or on shelves.

-Keep the unitÕs carrousel closed when not in use.

¥Continuous use of irregular shaped discs (heart-shape, octagonal, etc.) can damage the disc rotating mechanism.

¥CD-RWs may require a longer readout time since the reflectance of CD-RWs is lower than for regular CDs.

*For MP3/WMA discs

¥This unit manages files and folders on MP3/WMA discs as ÒtracksÓ and Òalbums.Ó

¥When playing an MP3/WMA disc, you can choose either TRACK mode or ALBUM mode. (See also page 17.)

¥Playback order of the MP3/WMA files (tracks) recorded on a disc are determined by the writing (or encoding) application; therefore, playback order may be different from the one you have intended while recording the files and the folders.

¥This unit shows the file (track) names and the ID3v1/1.1 tags (only ÒTitleÓ and ÒArtistÓ) on the display after the file starts play; however, there is a limitation on available characters and some file names and ID3v1/1.1 tags are not shown correctly.

More about MP3/WMA discs

¥MP3 discs (either CD-R or CD-RW) require a longer readout time. (It varies due to the complexity of the recording configuration.)

¥When making an MP3 disc, select ISO 9660 Level 1 or Level 2 as the disc format.

¥This unit does not support multisession recording.

¥This unit can play MP3 files only with the following file extensionsÑ Ò.MP3,Ó Ò.Mp3,Ó Ò.mP3,Ó and Ò.mp3.Ó

¥Non-MP3/WMA files are ignored. If non-MP3/WMA files are recorded together with MP3/WMA files, this unit will take a longer time to scan the disc. It may also cause the unit to malfunction.

¥Some MP3/WMA discs may not be played back because of their disc characteristics or recording conditions.

Loading CDs

1 Press 0. DISC SKIP

The unit automatically turns on and the carrousel comes out.

2 Place a disc correctly on the front recesses of the disc tray, with its label side up.

¥When using a CD single (8 cm), place it on the inner recess of the disc tray.

3 If you wish to load the second and	DISC SKIP
third discs, press DISC SKIP on
the unit.

Each time you press DISC SKIP, the disc tray rotates by 120û.

4 Press 0 again.

The carrousel closes.

For Audio CD:

For MP3/WMA disc:

Playing Back CDs—All Disc and One Disc

You can play all loaded CDs continuouslyÑAll disc playback, or one selected discÑOne disc playback.

All disc playback

On the remote control ONLY:

1 Load CDs.

¥If the current playing source is not CD, press CD 6, then 7 before going to the next step.

13