JVC SP-MXC55, LVT1541-004A Using the Timers, Using Daily Timer, How Daily Timer actually works

Using the Timers Continued

There are two kinds of timers availableÑDaily Timer and Sleep Timer.

Before using the timers, you need to set the clock built in the unit. (See ÒSetting the ClockÓ on page 9.)

Using Daily Timer

With Daily Timer, you can wake to your favorite music or radio program. You can set the timer whether the unit is on or off.

How Daily Timer actually works

The unit automatically turns on, sets the volume level to the preset level, and starts playing the specified source when the on-time comes (the indicator flashes while the timer is operating). Then, when the off-time comes, the unit automatically turns off (stands by).

Daily Timer works every day unless you cancel it.

¥There is a time limit in proceeding the following steps. If the setting is canceled before you finish, start from step 1 again.

Before you start...

¥When using the tuner as the source to play:

ÑMake sure to preset a station you want to listen. (See page 12.)

¥When using a CD as the source to play:

ÑMake sure there is a CD you want to play on the tray currently selected.

¥When using the external component as the source to play:

ÑSet the timer equipped with the external component at the same time.

On the remote control ONLY:

1 Press CLOCK/TIMER repeatedly until “TIMER” appears on the display.

ÒTIMERÓ appears on the display for a

second, then enters into the on-time setting mode.

¥Each time you press the button, the clock/timer setting modes change as follows:

DAILY TIMER CLOCK

(Daily Timer)

Canceled

2 Set the on-time you want the unit to turn on.

1Press ¢/¡ or 4/1 to set the hour, then press SET.

2Press ¢/¡ or 4/1 to set the minute, then press SET.

ÒOFF TIMEÓ appears. Press SET to enter into off-time setting mode.

3 Set the off-time you want

the unit to turn off (on standby).

1Press ¢/¡ or 4/1 to set the hour, then press SET.

2Press ¢/¡ or 4/1 to set the minute, then press SET.

The unit enters source selecting mode.

4 Press ¢/¡ or 4/1 to select the source to play, then press SET.

TUNER FM : tunes in to a specified preset FM station.

=go to step 5.

TUNER AM : tunes in to a specified preset AM station.

	= go to step 5.
CD	: plays the current disc from the first track.
	= go to step 6.
AUX	: plays an external source.
	= go to step 6.
USB	: plays an external source via USB.
	= go to step 6.

22