JVC LVT1541-004A, SP-MXC55, 0406KMMBICSAM manual Getting Started, Unpacking, Connecting Antennas

Getting Started

Continued

Unpacking

After unpacking, check if you have all the following accessories.

The number in the parentheses indicates the quantity of the pieces supplied.

¥AM loop antenna (1)

¥FM antenna (1)

¥Remote control (1)

¥Batteries (2)

If any is missing, consult your dealer immediately.

Inserting the Batteries into the Remote Control

Insert the batteriesÑR6P(SUM-3)/AA(15F)Ñinto the remote control, by matching the polarity (+ and Ð) on the batteries with the + and Ð markings on the battery compartment. When the remote control can no longer operate the unit, replace both batteries at the same time.

1

2 R6P(SUM-3)/AA(15F)

3

¥DO NOT use an old battery together with a new one.

¥DO NOT use different types of batteries together.

¥DO NOT expose batteries to heat or flame.

¥DO NOT leave the batteries in the battery compartment when you are not going to use the remote control for an extended period of time. Otherwise, it will be damaged from battery leakage.

Connecting Antennas

FM antenna

FM antenna (supplied)

1Connect the FM antenna to the FM [75 Ω] coaxial terminal.

2Extend the FM antenna.

3Fix it in the position which gives you the best reception, on the wall, etc.

About the supplied FM antenna

The FM antenna supplied with this unit can be used as temporary measure. If reception is poor, you can connect an outdoor FM antenna.

To connect an outdoor FM antenna

Before connecting it, disconnect the supplied FM antenna.

Outdoor FM antenna

(not supplied)

A 75 Ω antenna with coaxial type connector should be

used.

6