JVC 0406KMMBICSAM, LVT1541-004A manual Playing Back from the External Source, Connecting to Your PC

Models: 0406KMMBICSAM SP-MXC55 LVT1541-004A

1 30
Download 30 pages 27.24 Kb
Page 23
Image 23
Playing Back from the External Source

Playing Back from the External Source

Continued

 

 

Connecting to Your PC

This system is equipped with a USB terminal on the front panel. You can connect your PC to this terminal and enjoy sound reproduced through your PC.

When you connect your PC for the first time, follow the procedures below.

¥ The system cannot send any signal or data to your PC.

IMPORTANT

Always set volume to VOL MIN when connecting or disconnecting the other equipment.

DO NOT turn off the unit and disconnect the USB Connecting to Your PCHow to install the USB driversTo playback sounds stored on the PC cable while installing drivers and playing back, and

for several seconds after your PC recognizes the unit.

How to install the USB drivers

The following procedures are described using the Microsoft Windows¨ XP. If your PC is running on a different version of Windows, the screen shown on your PCÕs monitor will differ from the ones described in the following procedures.

1

Turn on your PC, and close all the running

 

applications.

 

2

Turn on the unit and press USB/

USB/AUX

AUX repeatedly to select USB.

3 Connect the unit to the PC using a USB cable (not supplied).

(this unit)

¥Use ÒUSB series A plug to B plugÓ cable when connecting.

4 The USB drivers are installed automatically.

¥If the USB drivers are not installed automatically, install the USB drivers manually following the instructions displayed on the PCÕs monitor.

5 Check if the drivers are correctly installed.

1Open the Control Panel on your PC: Select [Start] = [Settings] = [Control Panel]

2Click [System] = [Hardware] = [Device Manager] = [Sound, video and game controllers] and [Universal Serial Bus controllers]

¥The following window appears, and you can check whether the drivers are installed.

*The installed drivers are shown only when the unit is connected to the PC.

To playback sounds stored on the PC

Refer the manuals supplied with the sound reproduction application installed in the PC.

¥Noise and static electricity may stop the sound through the USB connection. In this case, do the following operations:

ÐDisconnect and connect the USB cable again.

ÐRestart the music software on your PC.

ÐTurn off and on the unit.

¥Windows¨ 98SE, Windows Me, Windows 2000 and Windows XP are registered trademarks of Microsoft Corporation.

20

Page 23
Image 23
JVC 0406KMMBICSAM, SP-MXC55 Playing Back from the External Source, Connecting to Your PC, How to install the USB drivers